Choice of copper-based alloys for ribbon substrates with a sharp cube texture

被引：11

作者：

Khlebnikova, Yu. V. ^{[1
]}

Rodionov, D. P. ^{[1
]}

Gervas'eva, I. V. ^{[1
]}

Suaridze, T. R. ^{[1
]}

Akshentsev, Yu. N. ^{[1
]}

Kazantsev, V. A. ^{[1
]}

机构：

[1] Russian Acad Sci, Ural Branch, Inst Met Phys, Ekaterinburg 620990, Russia

来源：

PHYSICS OF METALS AND METALLOGRAPHY | 2014年 / 115卷 / 12期

关键词：

copper-based alloys; cold deformation by rolling; annealing; recrystallization; perfect cube texture; electron diffraction; YBA2CU3O7-X COATED CONDUCTORS; NI ALLOYS; TEMPERATURE; TAPES; MN;

D O I：

10.1134/S0031918X14120035

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

It has been shown that, in some copper-based alloys subjected to cold deformation by rolling to 98.6-99% followed by recrystallization annealing, a sharp cube texture can be produced. Optimum conditions of annealing have been determined, which make it possible to produce a sharp biaxial texture in Cu-Ni, Cu-Fe, and Cu-Cr alloys with the fraction of cube grains of more than 95%; this opens a possibility of using thin ribbons made of these alloys as substrates for multilayer film compositions, in particular when developing second-generation high-temperature superconductors.

引用

页码：1231 / 1240

页数：10

共 23 条

[1] [Anonymous], 1958, Constitution of Binary Alloys
[2] [Anonymous], 1979, Theory of Texture Formation in Metals and Alloys
[3] STACKING FAULT DENSITY IN SOLID SOLUTIONS BASED ON COPPER SILVER NICKEL ALUMINIUM AND LEAD
DELEHOUZEE, L
DERUYTTERE, A
[J]. ACTA METALLURGICA, 1967, 15 (05): : 727 - +
[4] STACKING FAULT DENSITIES IN COPPER-GERMANIUM, COOPPER-SILICON AND COPPER-GERMANIUM-SILICON ALLOYS
FOLEY, JH
RAYNOR, GV
CAHN, RW
[J]. ACTA METALLURGICA, 1963, 11 (04): : 355 - &
[5] GALLAGHER PC, 1970, METALL TRANS, V1, P2429
[6] Biaxially textured copper-iron alloys for coated conductors
Gallistl, Bernhard
Kirchschlager, Raimund
Hassel, Achim Walter
[J]. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2012, 209 (05): : 875 - 879
[7] Formation of cube texture during annealing of rolled tapes from alloys Ni95.3Mo4.7 and Ni48.8Fe51.2
Gervas'eva, I. V.
Khlebnikova, Yu. V.
Rodionov, D. P.
Belosludtseva, E. S.
Milyutin, V. A.
Suaridze, T. R.
[J]. PHYSICS OF METALS AND METALLOGRAPHY, 2013, 114 (02) : 171 - 179
[8] Industrial Cu-Ni alloys for HTS coated conductor tape.
Girard, A.
Bruzek, C. E.
Jorda, J. L.
Ortega, L.
Soubeyroux, J. L.
[J]. 7TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS'05), 2006, 43 : 341 - 344
[9] Goyal A., 2005, Second Generation HTS Conductors
[10] EFFECT OF SOLUTE ATOMS ON STACKING FAULTS CU-NI AND CU-MN SYSTEMS
NAKAJIMA, K
NUMAKURA, K
[J]. PHILOSOPHICAL MAGAZINE, 1965, 12 (116): : 361 - &

← 1 2 3 →