X-ray computed tomography of fibre reinforced self-compacting concrete as a tool of assessing its flexural behaviour

被引：33

作者：

Ponikiewski, Tomasz ^{[1
]}

Katzer, Jacek ^{[2
]}

机构：

[1] Silesian Tech Univ, Fac Civil Engn, Dept Bldg Mat & Proc Engn, Akad 5, PL-44100 Gliwice, Poland

[2] Koszalin Univ Technol, Fac Civil Engn Environm & Geodet Sci, Dept Gen Bldg Engn & Bldg Mat, Sniadeckich 2, PL-45453 Koszalin, Poland

来源：

MATERIALS AND STRUCTURES | 2016年 / 49卷 / 06期

关键词：

SFRC; Steel fibres; Self-compacting concrete; Flexural tensile strength; X-ray computed tomography; XCT; SCC; SFR-SCC; STEEL FIBERS; MECHANICAL-PROPERTIES; ORIENTATION; BEAMS; WORKABILITY; COMPOSITES; DISPERSION; DESIGN; MIX;

D O I：

10.1617/s11527-015-0638-y

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The aim of the presented research programme was to investigate the flexural behaviour of steel fibre reinforced self-compacting concrete beams. The tested beams were reinforced with two types of crimped steel fibres. Fibres were added in volumes of 0.5, 1.0 and 1.5 %. The experimental tests were conducted on specimens cut from 1.2 m long elements. Before destructive mechanical testing the specimens were subjected to medical X-ray computed tomography (XCT) procedures. Results of XCT allowed to determine the distribution of fibres. The flexural behaviour of the beams was tested according to the RILEM TC 162-TDF recommendation. A comparison of non-destructive results and mechanical behaviour of tested specimens proved a very strong dependence. XCT also made it possible to assess the uniformity of fibre distribution throughout the tested elements. The influence of the location of concrete casting on fibre distribution was determined. The influence of mixture flow on fibre orientation was also analysed.

引用

页码：2131 / 2140

页数：10

共 50 条

[1] Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete [J].

Akcay, Burcu ;

Tasdemir, Mehmet Ali .

CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) :287-293

[2]

[Anonymous], 146512005A12007E EN

[3]

[Anonymous], 2013, FIB MOD COD CONCR ST

[4]

[Anonymous], 2002, Materials and Structures, V35, P579, DOI DOI 10.1007/BF02483127

[5]

[Anonymous], 2005, The ITK software guide

[6]

BANTHIA N, 1995, ACI MATER J, V92, P48

[7] Round-robin analysis of the RILEM TC 162-TDF beam-bending test:: Part 2 -: Approximation of δ from the CMOD response [J].

Barr, BIG ;

Lee, MK ;

Hansen, EJD ;

Dupont, D ;

Erdem, E ;

Schaerlaekens, S ;

Schnütgen, B ;

Stang, H ;

Vandewalle, L .

MATERIALS AND STRUCTURES, 2003, 36 (263) :621-630

[8]

Bartos P.J.M., 2002, REPORT RILEM TECHNIC

[9]

Bentur A., 2007, Fibre reinforced cementitious composites, V2nd ed., DOI DOI 10.1016/0010-4361(79)90446-4

[10]

BRANDT AndrzejM., 2009, CEMENT BASED COMPOSI

← 1 2 3 4 5 →