Tests of concrete-filled double skin CHS composite stub columns

被引:115
作者
Zhao, XL [1 ]
Grzebieta, R [1 ]
Elchalakani, M [1 ]
机构
[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia
关键词
concrete-filled tubes; double-skin composite sections; circular hollow sections;
D O I
10.12989/scs.2002.2.2.129
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper describes a series of compression tests carried out on concrete filled double skin tubes (CFDST). Both outer and inner tubes are cold-formed circular hollow sections (CHS). Six section sizes were chosen for the outer tubes with diameter-to-thickness ratio ranging from 19 to 57. Two section sizes are chosen for the inner tubes with diameter-to-thickness ratio of 17 and 33. The failure modes, strength, ductility and energy absorption of CFDST are compared with those of empty single skin tubes. Increased ductility and energy absorption have been observed for CFDST especially for those having slender outer tubes with larger diameter-to-thickness ratio. Predictions from several theoretical models are compared with the ultimate strength of CFDST stub columns obtained in the tests. The proposed formula was found to be in good agreement with the experimental data.
引用
收藏
页码:129 / 146
页数:18
相关论文
共 26 条
[1]  
ACI, 1995, 31895 ACI
[2]  
[Anonymous], 1999, Load and Resistance Factor Design Specification for Structural Steel Buildings
[3]  
*EC4, 1992, DES COMP STEEL CON 1
[4]  
ELCHALAKANI E, 2002, IN PRESS THIN WALLED
[5]   Bending tests to determine slenderness limits for cold-formed circular hollow sections [J].
Elchalakani, M ;
Zhao, XL ;
Grzebieta, R .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2002, 58 (11) :1407-1430
[6]  
ELCHALAKANI M, 2002, IN PRESS INT J MECH
[7]  
GRZEBIETA RH, 1990, THESIS MONASH U AUST
[8]   Column curves of steel-concrete composite members [J].
Kato, B .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 1996, 39 (02) :121-135
[9]  
Lin ML., 2001, P 1 INT C STEEL COMP, P1145
[10]   EXPERIMENTAL BEHAVIOR OF DOUBLE-SKINNED, COMPOSITE, CIRCULAR CYLINDRICAL-SHELLS UNDER EXTERNAL-PRESSURE [J].
MONTAGUE, P .
JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1978, 20 (01) :21-34