Seismic cone penetration test and seismic tomography in permafrost

Two high-resolution multi-offset vertical seismic profile (VSP) surveys were carried out in a permafrost mound near Umiujaq in northern Quebec, Canada, while performing seismic cone penetration tests (SCPT) to study the cryostratigraphy and assess the body waves velocities and the dynamic properties of warm permafrost. Penetrometer-mounted triaxial accelerometers were used as the VSP receivers, and a swept impact seismic technique (SIST) source generating both compressional and shear waves was moved near the surface following a cross configuration of 40 seismic shot-point locations surrounding each of the two SCPTs. The inversion of travel times based on a simultaneous iterative reconstruction technique (SIRT) provided tomographic images of the distribution of seismic velocities in permafrost. The Young's and shear moduli at low strains were then calculated from the seismic velocities and the permafrost density measured on core samples. The combination of multi-offset VSP survey, SCPT, SIST, and SIRT for tomographic imaging led to new insights in the dynamic properties of permafrost at temperatures close to 0degreesC. The P- and S-wave velocities in permafrost vary from 2400 to 3200 m/s and from 900 to 1750 m/s, respectively, for a temperature range between -0.2 and -2.0degreesC. The Young's modulus varies from 2.15 to 13.65 GPa, and the shear modulus varies from 1.00 to 4.75 GPa over the same range of temperature.