Effect of Ar+ ion beam in the process of plasma surface modification of PET films

被引:1
作者
Hyun, J
Barletta, P
Koh, K
Yoo, S
Oh, J
Aspnes, DE
Cuomo, JJ
机构
[1] N Carolina State Univ, Dept Mat Sci & Engn, Raleigh, NC 27695 USA
[2] N Carolina State Univ, Dept Phys, Raleigh, NC 27695 USA
关键词
polymer; plasma; ion beam; crosslinking; hydrophilic;
D O I
10.1002/1097-4628(20000822)77:8<1679::AID-APP4>3.0.CO;2-F
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
In general, plasma modified polymer surfaces tend to show short aging time and rapid hydrophobic recovery after treatment. To prevent reorientation from the surface to the bulk, appropriate crosslinking is necessary among the polymer chains. In this work, an Ar+ ion beam was used to provide crosslinking to the surface. Crosslinking was shown by spectroscopic ellipsometry, AFM, and FTIR. Contact angle measurements were performed to see the aging of the modified surfaces. The surface modified with Ar+ ion beam followed by RF plasma treatment exhibited reduced chain mobility and a highly stable hydrophilic surface. (C) 2000 John Wiley & Sons, Inc.
引用
收藏
页码:1679 / 1683
页数:5
相关论文
共 50 条
[41]   Effect of Conditions for Modification in a High-Frequency Discharge Plasma on the Reversibility of the Surface Properties of Polyethylene Films [J].
Yulenets, Yu P. ;
Markov, A., V ;
Grachev, S. Yu .
SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2021, 57 (02) :185-189
[42]   Effect of Conditions for Modification in a High-Frequency Discharge Plasma on the Reversibility of the Surface Properties of Polyethylene Films [J].
Yu. P. Yulenets ;
A. V. Markov ;
S. Yu. Grachev .
Surface Engineering and Applied Electrochemistry, 2021, 57 :185-189
[43]   Polymer surface modification by ion implantation and reactive deposition of transparent films [J].
Guzman, L ;
Celva, R ;
Miotello, A ;
Voltolini, E ;
Ferrari, F ;
Adami, M .
SURFACE & COATINGS TECHNOLOGY, 1998, 104 :375-379
[44]   Neutralized ion beam modification of cellulose membranes for study of ion charge effect on ion-beam-induced DNA transfer [J].
Prakrajang, K. ;
Sangwijit, K. ;
Anuntalabhochai, S. ;
Wanichapichart, P. ;
Yu, L. D. .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2012, 272 :382-385
[45]   Effect of ion beam bombardment on the properties of Ni films deposited on polyimide by ion beam assisted deposition [J].
Xu, Jun ;
Shao, Tianmin ;
Wei, Songbo ;
Qin, Li .
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (21-22) :3443-3450
[46]   Effect of Plasma Modification on Dielectric Properties of Polyimide Nanocomposite Films [J].
Liu, Juan ;
Wu, Guangning ;
Yang, Yan ;
Lei, Yixin ;
Deng, Jiang .
2019 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (CEIDP), 2019, :344-347
[47]   Stainless steel surface modification induced by argon and krypton ion beam bombardment [J].
Kowalski, Zbigniew W. .
PRZEGLAD ELEKTROTECHNICZNY, 2012, 88 (11B) :352-354
[48]   Ion irradiation-induced sputtering and surface modification of BN films prepared by a reactive plasma-assisted coating technique [J].
Matsuda, T. ;
Hamano, T. ;
Asamoto, Y. ;
Noma, M. ;
Yamashita, M. ;
Hasegawa, S. ;
Urabe, K. ;
Eriguchi, K. .
JAPANESE JOURNAL OF APPLIED PHYSICS, 2022, 61 (SI)
[49]   Surface modification of polyimide alignment films by ion beams for liquid crystal displays [J].
Chien, H. W. ;
Wu, G. M. ;
Chiue, C. W. ;
Chen, C. N. .
SURFACE & COATINGS TECHNOLOGY, 2011, 206 (05) :797-800
[50]   Plasma treatment of CFX: the effect of surface chemical modification coupled with surface etching [J].
Chaehun Lim ;
Seongmin Ha ;
Naeun Ha ;
Seo Gyeong Jeong ;
Young-Seak Lee .
Carbon Letters, 2024, 34 :611-617