Performance evaluation of cyanate ester resin

被引：3

作者：

Voss, G ^{[1
]}

Fabian, P ^{[1
]}

Feucht, S ^{[1
]}

Harte, A ^{[1
]}

Terry, C ^{[1
]}

机构：

[1] EURATOM, UKAEA, Fus Assoc, Culham Sci Ctr, Abington, PA USA

来源：

20TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, PROCEEDINGS | 2003年

关键词：

D O I：

10.1109/FUSION.2003.1426618

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Traditional epoxy resin systems have long been used for vacuum impregnation of large electro-magnets. However, the mechanical strength of these systems is disappointingly low when operated at temperatures above about 70degreesC where the failure mechanism is more often by adhesion at the copper interface than by cohesion within the resin. A range of resin systems based on cyanate ester are currently being developed by CTD Inc. which are suitable for vacuum impregnation and may offer advantages over the epoxy resin systems. In order to assess the thermo-mechanical performance of these newly developed materials a programme of testing and evaluation of the basic cyanate ester resin (CTD 403) has been carried out and the results are presented here.

引用

页码：181 / 184

页数：4

共 50 条

[31] A kinetic study on the autocatalytic cure reaction of a cyanate ester resin
Chen, CC
Don, TM
Lin, TH
Cheng, LP
JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 92 (05) : 3067 - 3079
[32] Phthalonitrile resin bearing cyanate ester groups: synthesis and characterization
Augustine, Dhanya
Mathew, Dona
Nair, C. P. Reghunadhan
RSC ADVANCES, 2015, 5 (111): : 91254 - 91261
[33] Synthesis, characterization and applications of polyurethane aryl cyanate ester resin
Pazhanikumar, T.
Sivasankar, B.
Sugumaran, T.
HIGH PERFORMANCE POLYMERS, 2007, 19 (01) : 97 - 112
[34] A kinetic study on the autocatalytic cure reaction of a cyanate ester resin
Don, T.-M. (tmdon@mail.tku.edu.tw), 1600, John Wiley and Sons Inc. (92):
[35] Preparation and characterization of novel cyanate ester/epoxy resin microspheres
Wei Wang
Li Yuan
Guozheng Liang
Aijuan Gu
Jianyuan Wu
Colloid and Polymer Science, 2010, 288 : 719 - 729
[36] Preparation and characterization of cyanate ester resin/graphene oxide nanocomposites
Lin, Q. (linqilang@126.com), 1600, Chengdu University of Science and Technology (28):
[37] Polycyanurate fundamentals. Additives and modifiers for cyanate ester resin
Pascault, J.-P.
Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering, 1994, 71
[38] CHARACTERIZATION OF BISPHENOL-A - BASED CYANATE ESTER RESIN SYSTEMS
OSEIOWUSU, A
MARTIN, GC
GOTRO, JT
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1991, 202 : 152 - PMSE
[39] Cure kinetics modeling of cyanate-ester resin system
Siddiqui, A. O.
Sudher, P.
Murthy, B. V. S. R.
THERMOCHIMICA ACTA, 2013, 554 : 8 - 14
[40] Properties and preparation of cyanate ester resin/graphite oxide composites
Zhao, Chun-Bao
Su, Lei
Yang, Xu-Jie
Wang, Xin
Gongneng Cailiao/Journal of Functional Materials, 2013, 44 (16): : 2301 - 2304

← 1 2 3 4 5 →