Grain boundary statistics in nano-structured iron produced by high pressure torsion

被引：67
作者：
Ivanisenko, Y
Valiev, RZ
Fecht, HJ
机构：
[1] Forschungszentrum Karlsruhe, Helmholtzgesellsch, Inst Nanotechnol, D-76021 Karlsruhe, Germany
[2] Ufa State Aviat Tech Univ, InstPhys Adv Mat, Ufa 450000, Russia
[3] Univ Ulm, Div Mat, D-89081 Ulm, Germany
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 390卷 / 1-2期
关键词：
Armco iron; high pressure torsion; orientation imaging microscopy; boundary misorientations;
D O I：
10.1016/j.msea.2004.08.071
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure and the spectrum of grain boundary misorientations were studied in Armco iron, following high pressure torsion (HPT) deformation, by means of transmission electron microscopy (TEM) and orientation imaging microscopy (OIM). It was found that HPT deformation results in the formation of an equiaxed grain structure with a mean grain size of 270 and 130nm using a shear strain of y=210 and 420, respectively. The misorientation spectra in HPT iron have a bimodal character with maxima in low (at 1-2degrees) as well as in high misorientation angle ranges. A marked increase in the fraction of special boundaries (Sigma3-Sigma45) was revealed as a result of HPT. The microstructural changes due to HPT are discussed and compared with those obtained during conventional deformation modes. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：159 / 165
页数：7
相关论文
共 23 条
[1]   STRUCTURE OF HIGH-ANGLE GRAIN BOUNDARIES [J].
BRANDON, DG .
ACTA METALLURGICA, 1966, 14 (11) :1479-&
[2]   Deformation induced grain boundaries in commercially pure aluminium [J].
Chang, CP ;
Sun, PL ;
Kao, PW .
ACTA MATERIALIA, 2000, 48 (13) :3377-3385
[3]   Development of submicron sized grain during cyclic equal channel angular pressing [J].
Chang, JY ;
Yoon, JS ;
Kim, GH .
SCRIPTA MATERIALIA, 2001, 45 (03) :347-354
[4]   STRUCTURAL ASPECTS OF MATERIALS SUBJECTED TO LARGE STRAINS [J].
EMBURY, JD .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 175 (1-2) :105-111
[5]  
FECHT HJ, 1996, NANOMATERIALS SYNTHE, P89
[6]   The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE [J].
Gholinia, A ;
Prangnell, PB ;
Markushev, MV .
ACTA MATERIALIA, 2000, 48 (05) :1115-1130
[7]  
Hirth J. P., 1982, THEORY DISLOCATIONS
[8]   EBSD study on grain boundary characteristics in fine-grained Al alloys [J].
Huang, JC ;
Hsiao, IC ;
Wang, TD ;
Lou, BY .
SCRIPTA MATERIALIA, 2000, 43 (03) :213-220
[9]   Microstructure and strength of nickel at large strains [J].
Hughes, DA ;
Hansen, N .
ACTA MATERIALIA, 2000, 48 (11) :2985-3004
[10]  
Korotaev AD, 2000, PHYS MET METALLOGR+, V90, pS36
123