Dynamic interaction between a laser beam and keyhole front wall during fiber laser welding

被引：5

作者：

Guo, S. H. ^{[1
,2
]}

Wu, Q. ^{[1
,2
]}

Zou, J. L. ^{[1
,2
]}

Xiao, R. S. ^{[1
,2
]}

Ha, N. ^{[1
,2
]}

机构：

[1] Beijing Univ Technol, High Power & Ultrafast Laser Mfg Lab, Inst Laser Engn, Beijing 100124, Peoples R China

[2] Beijing Engn Researching Ctr Laser Technol, Beijing 100124, Peoples R China

来源：

LASER PHYSICS | 2019年 / 29卷 / 11期

基金：

中国国家自然科学基金;

关键词：

fiber laser welding; keyhole front wall (KFW); period; drilling speed; interaction; FRESNEL ABSORPTION; MOLTEN POOL; MECHANISM;

D O I：

10.1088/1555-6611/ab3c47

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

A bright spot (laser beam spot-center-induced metal vapor) on the keyhole front wall (KFW) was observed during fiber laser keyhole welding of a 'sandwich' specimen to reveal the interaction between the laser beam and the KFW. The dynamic behavior of the bright spot shows that the keyhole formation is the result of periodical drilling of the laser beam spot center on the KFW during welding. Welding parameters have little effect on the drilling period. The drilling speed first increases and then decreases with the increase in the keyhole depth, and the next drilling process begins before the drilling speed reduces to 0 m s(-1). The average drilling speed can be increased by increasing the line energy or power density of the laser.

引用

页数：7

共 22 条

[1] Experimental and numerical analysis of molten pool and keyhole profile during high-power deep-penetration laser welding [J].

Ai, Yuewei ;

Jiang, Ping ;

Wang, Chunming ;

Mi, Gaoyang ;

Geng, Shaoning .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 :779-789

[2] A ray-tracing analysis of the absorption of light by smooth and rough metal surfaces [J].

Bergstrom, D. ;

Powell, J. ;

Kaplan, A. F. H. .

JOURNAL OF APPLIED PHYSICS, 2007, 101 (11)

[3] Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole [J].

Cho, Jung-Ho ;

Na, Suck-Joo .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2006, 39 (24) :5372-5378

[4] Measurements of fluid flow on keyhole front during laser welding [J].

Eriksson, I. ;

Powell, J. ;

Kaplan, A. F. H. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (07) :636-641

[5] High-speed X-Ray analysis of spatter formation in laser welding of copper [J].

Heider, A. ;

Sollinger, J. ;

Abt, F. ;

Boley, M. ;

Weber, R. ;

Graf, T. .

LASERS IN MANUFACTURING (LIM 2013), 2013, 41 :112-118

[6] Effect of magnesium content on keyhole-induced porosity formation and distribution in aluminum alloys laser welding [J].

Huang, Lijin ;

Hua, Xueming ;

Wu, Dongsheng ;

Fang, Li ;

Cai, Yan ;

Ye, Youxiong .

JOURNAL OF MANUFACTURING PROCESSES, 2018, 33 :43-53

[7] Local absorptivity modulation of a 1 μm-laser beam through surface waviness [J].

Kaplan, Alexander F. H. .

APPLIED SURFACE SCIENCE, 2012, 258 (24) :9732-9736

[8] Fresnel absorption of 1 μm- and 10 μm-laser beams at the keyhole wall during laser beam welding: Comparison between smooth and wavy surfaces [J].

Kaplan, Alexander F. H. .

APPLIED SURFACE SCIENCE, 2012, 258 (08) :3354-3363

[9] High quality welding of stainless steel with 10 kW high power fibre laser [J].

Kawahito, Y. ;

Mizutani, M. ;

Katayama, S. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (04) :288-294

[10] Mechanism of keyhole formation and stability in stationary laser welding [J].

Lee, JY ;

Ko, SH ;

Farson, DF ;

Yoo, CD .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2002, 35 (13) :1570-1576

← 1 2 3 →