Effect of amplitude and frequency of ultrasonic irradiation on morphological characteristics control of calcium carbonate

We have previously reported on the morphological control of calcium carbonate by changing synthetic conditions such as temperature, pH and degree of supersaturation in liquid reaction. The present study reports the effect of amplitude and frequency of ultrasonic irradiation on the particle size of calcium carbonate using a horn type ultrasonic apparatus at two different frequencies. The calcium carbonate precipitated by mechanical stirring had a particle size of about 20 mu m. By contrast, the particle size of vaterite formed under ultrasonic irradiation was about 2 mu m, with a specific surface area of 25-30 m(2)/g. The major polymorph of calcium carbonate formed by ultrasonic irradiation was vaterite with some calcite present. For 40 kHz ultrasonic irradiation, the specific surface area of the calcium carbonate increased with increasing amplitude. The particle size of vaterite formed at this frequency was about 2 mu m, and its distribution was sharper than that obtained at 20 kHz. The mode diameter of the synthesized vaterite was found to decrease with increasing amplitude at 40 kHz. Crown Copyright (c) 2009 Published by Elsevier B.V. All rights reserved.