Optimization of Mixing and Mass Transfer in In-line Multi-Jet Ozone Contactors Using Computational Fluid Dynamics

被引：9

作者：

Pathapati, Srikanth S. ^{[1
]}

Mazzei, Angelo L. ^{[1
]}

Jackson, James R. ^{[1
]}

Overbeck, Paul K. ^{[1
]}

Bennett, Justin P. ^{[1
]}

Cobar, Cece M. ^{[1
]}

机构：

[1] Mazzei Injector Co LLC, 500 Rooster Dr, Bakersfield, CA 93307 USA

来源：

OZONE-SCIENCE & ENGINEERING | 2016年 / 38卷 / 04期

关键词：

Ozone; Basin Nozzle Manifold; Computational Fluid Dynamics; Drinking Water Treatment; Fine Bubble Diffusion; Injection; Multi-Phase; Ozonation; Reactor Design; Retrofit; Side-Stream Venturi Injection; DISINFECTION;

D O I：

10.1080/01919512.2016.1188682

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Typical ozone mixing and mass transfer calculations are lumped approaches based on ideal operating conditions and can misrepresent behavior in real-life installations. This article models the effect of local hydrodynamics and mixing on the overall mass transfer of ozone into water with the aid of multiphase computational fluid dynamics (CFD). CFD models were validated with measured data from a pipeline ozone contactor installation which was optimized for more rapid, uniform mixing and mass transfer. Results emphasize the sensitivity of mixing quality to nozzle placement, size, orientation and spacing relative to main pipeline diameter and flows.

引用

页码：245 / 252

页数：8

共 21 条

[1] Hydrodynamic Characterization and Mass Transfer Analysis of an In-Line Multi-Jets Ozone Contactor
Baawain, Mahad S.
El-Din, Mohamed Gamal
Smith, Daniel W.
Mazzei, Angelo
OZONE-SCIENCE & ENGINEERING, 2011, 33 (06) : 449 - 462
[2] Geometric design of a mass transfer sensor enclosure using computational fluid dynamics
Srirama, A
Morrison, G
INDOOR AIR 2005: PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON INDOOR AIR QUALITY AND CLIMATE, VOLS 1-5, 2005, : 2877 - 2881
[3] Multi-objective Bayesian optimization of chemical reactor design using computational fluid dynamics
Park, Seongeon
Na, Jonggeol
Kim, Minjun
Lee, Jong Min
COMPUTERS & CHEMICAL ENGINEERING, 2018, 119 : 25 - 37
[4] Computational fluid dynamics analysis of mixing and gas-liquid mass transfer in wave bag bioreactor
Svay, Kirilynn
Urrea, Christine
Shamlou, Parviz Ayazi
Zhang, Hu
BIOTECHNOLOGY PROGRESS, 2020, 36 (06)
[5] Hydrodynamics and Mass Transfer Simulation in Airlift Bioreactor with Settler using Computational Fluid Dynamics
Hernandez-Calderon, Oscar M.
Gonzalez-Llanes, Marcos D.
Rios-Iribe, Erika Y.
Jimenez-Lam, Sergio A.
del Carmen Chavez-Parga, Ma.
Escamilla-Silva, Eleazar M.
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2017, 15 (04)
[6] Computational Fluid Dynamics Simulation of Mass Transfer in the Separation of Fermentation Products Using Nanoporous Membranes
Ranjbar, Mahmoud
Shirazian, Saeed
Parto, Soheila Ghafarnejad
Ahmadi, Mitra
CHEMICAL ENGINEERING & TECHNOLOGY, 2013, 36 (05) : 728 - 732
[7] OPTIMIZATION OF HEAT TRANSFER PROCESS IN A WALKING BEAM REHEAT FURNACE USING COMPUTATIONAL FLUID DYNAMICS
Chen, Yuchao
Silaen, Armin K.
Walla, Nicholas
Johnson, Kurt
Zhou, Chenn Q.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 8A, 2019,
[8] Multi-objective optimization of a gas cyclone separator using genetic algorithm and computational fluid dynamics
Sun, Xun
Yoon, Joon Yong
POWDER TECHNOLOGY, 2018, 325 : 347 - 360
[9] Analysis of heat and mass transfer in vacuum membrane distillation for water desalination using computational fluid dynamics (CFD)
Hayer, Hossein
Bakhtiari, Omid
Mohammadi, Toraj
DESALINATION AND WATER TREATMENT, 2015, 55 (01) : 39 - 52
[10] Investigating the Design and Implementation of an In-Line Near-Infrared Probe Using Computational Fluid Dynamics for Measurement of Non-Newtonian Fluids
Haroon, Kiran
John, Thomas
Fonte, Claudio P.
Mendoza, Cesar
Baker, Michael
Martin, Philip
APPLIED SPECTROSCOPY, 2022, 76 (03) : 331 - 339

← 1 2 3 →