Complex influence of the preliminary orientation strain stress and annealing temperature on the structure development of poly (ethylene terephthalate) fibers

被引:0
作者
Velev, V. [1 ]
Androsch, R. [2 ]
Dimov, T. [1 ]
Popov, A. [3 ]
Radusch, H. -J. [2 ]
机构
[1] Konstantin Preslavsky Univ Shumen, Shumen 9712, Bulgaria
[2] MLU, Ctr Engn Sci, D-06217 Merseburg, Germany
[3] Univ Prof Dr Assen Zlatarov Bourgas, Burgas 8000, Bulgaria
来源
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS | 2010年 / 12卷 / 04期
关键词
Poly (ethylene terephthalate) fiber; Strain stress; Heat-mechanical treatment; Structure development; POLY(ETHYLENE-TEREPHTHALATE); CRYSTALLIZATION;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present work the structural development of freshly moulded poly (ethylene terephthalate) fibers with different preliminary orientation subjected to simultaneously thermal and mechanical treatments was studied. Uniaxially strain-loading experiments are conducted with partially crystalline PET yarns in a narrow temperature range from 80 degrees C to 95 degrees C and strain stress values of 40 MPa, 80 MPa, and 120 MPa. Differential scanning calorimetry and birefringence measurements were used to investigate the effects of the preliminary orientation, annealing temperatures and strain stress on the structure development of the studied samples. There are established relationships between the fibres preorientation, experimental parameters and the structural rearrangements running in the investigated yarns.
引用
收藏
页码:958 / 961
页数:4
相关论文
共 13 条