Quantitative analysis of microstructure and impact toughness in the simulated coarse-grained heat-affected zone of Cu-bearing steels

被引：4
|
作者：
Liu, Y. [1 ]
Li, G. Q. [1 ,2 ]
Wan, X. L. [1 ,2 ]
Gang, H. [1 ]
Wu, K. M. [1 ]
Zhang, X. [1 ]
机构：
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Hubei, Peoples R China
[2] Wuhan Univ Sci & Technol, Minist Educ, Key Lab Ferrous Met & Resources Utilizat, Wuhan, Hubei, Peoples R China
来源：
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2019年 / 26卷 / 24期
基金：
中国国家自然科学基金; 中国博士后科学基金;
关键词：
CGHAZ; Cu; inclusion; acicular ferrite; impact toughness; ACICULAR FERRITE FORMATION; LOW-CARBON; INTRAGRANULAR FERRITE; MECHANICAL-PROPERTIES; NUCLEATION; IMPROVEMENT; INCLUSIONS; CR;
D O I：
10.1080/15376494.2018.1455938
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Because of 0.32% Cu addition, the inclusion is modified from Al-Ti oxide covered with layer of MnS in Cu-free steel to Al-Ti oxide with shell of (Mn,Cu)S in Cu-bearing steel. The quantitative result reveals that the frequency of inclusion effectively for acicular ferrite nucleation, fraction of acicular ferrite and high angle grain boundary in the simulated coarse-grained heat-affected zone (CGHAZ) of Cu-bearing steel are higher than that of Cu-free steel, respectively. Therefore, the high density of acicular ferrite microstructures in CGHAZ of Cu-bearing steel with smaller crystallographic grain size has superior impact toughness than that in Cu-free steel.
引用
收藏
页码：2030 / 2039
页数：10
相关论文
共 50 条
  • [1] Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels
    Huang, G.
    Wan, X. L.
    Wu, K. M.
    Isayev, O.
    Hress, O.
    Rodionova, I.
    Shirzadi, A. A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2017, 33 (05) : 602 - 614
  • [2] Toughness improvement by Cu addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels
    Wan, X. L.
    Wu, K. M.
    Huang, G.
    Nune, K. C.
    Li, Y.
    Cheng, L.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2016, 21 (04) : 295 - 302
  • [3] Comparison of Impact Toughness in Simulated Coarse-Grained Heat-Affected Zone of Al-Deoxidized and Ti-Deoxidized Offshore Steels
    Tervo, Henri
    Kaijalainen, Antti
    Javaheri, Vahid
    Ali, Mohammed
    Alatarvas, Tuomas
    Mehtonen, Mikko
    Anttila, Severi
    Komi, Jukka
    METALS, 2021, 11 (11)
  • [4] Effect of Cr Content on Microstructure and Impact Toughness in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels
    Huang, Gang
    Wan, Xiang Liang
    Wu, Kai Ming
    STEEL RESEARCH INTERNATIONAL, 2016, 87 (11) : 1426 - 1434
  • [5] The role of Cu and Al addition on the microstructure and fracture characteristics in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels with superior toughness
    Liu, Yu
    Li, Guangqiang
    Wan, Xiangliang
    Wang, Honghong
    Wu, Kaiming
    Misra, R. D. K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2017, 33 (15) : 1750 - 1764
  • [6] Mo Content Effect on Microstructures and Toughness of the Simulated Coarse-Grained Heat-Affected Zone of Weathering Bridge Steels
    Zhang, L. F.
    Wang, Y. F.
    Zhang, L.
    Wang, Q. F.
    Wang, T. S.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (07) : 5641 - 5651
  • [7] Effects of heat input on microstructure and fracture toughness of simulated coarse-grained heat affected zone for HSLA steels
    Yang, Xiaocong
    Di, Xinjie
    Liu, Xiuguo
    Wang, Dongpo
    Li, Chengning
    MATERIALS CHARACTERIZATION, 2019, 155
  • [8] Toughness improvement by Zr addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels
    Liu, Yu
    Li, Guangqiang
    Wan, Xiangliang
    Zhang, Xianguang
    Shen, Yu
    Wu, Kaiming
    IRONMAKING & STEELMAKING, 2019, 46 (02) : 113 - 123
  • [9] Particle and microstructural characteristics in the coarse-grained heat-affected zone of Al-Ti-Ca complex deoxidized steels
    Liu, Yu
    Wan, Xiangliang
    Li, Guangqiang
    Wang, Yong
    Zheng, Wan
    Hou, Yanhui
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (02) : 137 - 147
  • [10] Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel
    Shi, Minghao
    Di, Man
    Zhang, Jian
    Kannan, Rangasayee
    Li, Jing
    Yuan, Xiaoguang
    Li, Leijun
    MATERIALS, 2021, 14 (16)
12345