Nonlinear fibre element modelling of RC bridge piers considering inelastic buckling of reinforcement

被引：98

作者：

Kashani, Mohammad M. ^{[1
]}

Lowes, Laura N. ^{[2
]}

Crewe, Adam J. ^{[1
]}

Alexander, Nicholas A. ^{[1
]}

机构：

[1] Univ Bristol, Dept Civil Engn, Bristol BS8 1TR, Avon, England

[2] Univ Washington, Dept Civil & Environm Engn, Seattle, WA 98195 USA

来源：

ENGINEERING STRUCTURES | 2016年 / 116卷

关键词：

Nonlinear analysis; Finite element method; Reinforcing steel; Buckling; Force-based element; Postbuckling; Reinforced concrete; Bridge piers; Low-cycle fatigue; Cyclic degradation; STRESS-STRAIN BEHAVIOR; BEAM-COLUMN MODEL; CYCLIC RESPONSE; R/C FRAMES; BARS; CONCRETE; PERFORMANCE; STABILITY;

D O I：

10.1016/j.engstruct.2016.02.051

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

An advanced modelling technique is developed to model the nonlinear cyclic response of circular RC columns using fibre-based section discretisation method. A comparison between different reinforcing steel models is made. Through a comprehensive parametric study the influence of inelastic buckling of vertical reinforcement on the cyclic response of circular RC columns is investigated. The results have been compared and validated against a set of experimental datasets. The proposed calibrated model accounts for the influence of inelastic buckling of vertical reinforcement and interaction of stiffness of horizontal ties reinforcement with vertical reinforcement. The model also accounts for the fracture of vertical bars due to low-cycle high-amplitude fatigue degradation. Therefore, this model is able to predict the nonlinear cyclic response of circular RC columns up to complete collapse. The results show that the existing uniaxial material models of reinforcing bars that are calibrated using stress-strain behaviour of isolated bars cannot represent the behaviour of reinforcing bars inside RC columns. Moreover, it is found that the buckling length of vertical reinforcement has a significant influence on the pinching response of RC columns and also reduces the low-cycle fatigue life of budded reinforcement. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：163 / 177

页数：15

共 35 条

[31] Upper-bound equation of compressive load-carrying capacity of RC column considering characteristic of material and buckling of primary reinforcement [J].

Sudo, M ;

Kida, T ;

Kato, K ;

Abe, T ;

Kuroda, I ;

Kato, N ;

Kamisawa, T .

MATERIALS SCIENCE RESEARCH INTERNATIONAL, 2001, 7 (02) :96-102

[32] Fibre beam element models for nonlinear analysis of concentrically loaded circular CFT columns considering the size effect [J].

Lin, Siqi ;

Zhao, Yan-Gang ;

Lu, Zhao-Hui .

ENGINEERING STRUCTURES, 2020, 210

[33] Nonlinear 2D Finite-Element Modeling of RC Beams Strengthened with Prestressed NSM CFRP Reinforcement [J].

Yao, Liu-Zhen ;

Wu, Gang .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2016, 20 (04)

[34] UHPC jacket retrofitting of reinforced concrete bridge piers with low flexural reinforcement ratios: experimental investigation and three-dimensional finite element modeling [J].

Tong, Teng ;

Wang, Jingquan ;

Lei, Haipeng ;

Liu, Zhao .

STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2021, 17 (10) :1315-1337

[35] Nonlinear Finite Element Modelling and Parametric Analysis of Shear Strengthening RC T-Beams with NSM CFRP Technique [J].

Majid M. A. Kadhim ;

Ali Hadi Adheem ;

Akram R. Jawdhari .

International Journal of Civil Engineering, 2019, 17 :1295-1306

← 1 2 3 4 →