Fretting fatigue properties of WC-Co thermal sprayed NiCrMo steel

被引：4

作者：

Okane, M ^{[1
]}

Shiozawa, K ^{[1
]}

Hiki, M ^{[1
]}

Suzuki, K ^{[1
]}

机构：

[1] Toyama Univ, Fac Engn, Dept Mech & Intellectual Syst Engn, Toyama 9308555, Japan

来源：

FRETTING FATIGUE: ADVANCES IN BASIC UNDERSTANDING AND APPLICATIONS | 2003年 / 1425卷

关键词：

fretting fatigue; NiCrMo steel; spray; WC-Co; HVOF; fretting wear;

D O I：

10.1520/STP10772S

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fretting fatigue tests of NiCrMo steel (JIS SNCM439) sprayed with tungsten carbide with additive of 12% cobalt (WC-Co) by HVOF (High Velocity Oxygen Fuel) were carried out to study the effect of WC-Co coating on fretting fatigue behavior. Since the fatigue strength of the present alloy steel was reduced to about 27% by the effect of fretting, fretting fatigue strength was improved by approximately 30% by WC-Co spraying onto the specimen. The tangential force coefficient, which is tangential force measured during the fretting fatigue tests divided by contact load, behaviors of WC-Co sprayed specimen were different form those of the non-sprayed specimen. Especially, the tangential force of WC-Co specimen in an early stage of the test indicated significant low value compared with that of non-sprayed specimen and this was caused from good wear resistance of WC-Co layer. Therefore, the initiation of a fretting crack in case of WC-Co sprayed specimens delayed, and crack propagation rate was lower than that of non-sprayed specimen. These were main reasons for the improvement of fretting fatigue strength by-WC-Co. spray.

引用

页码：385 / 399

页数：15

共 26 条

[11] MECHANISMS OF FRETTING FATIGUE [J].

MUTOH, Y .

JSME INTERNATIONAL JOURNAL SERIES A-MECHANICS AND MATERIAL ENGINEERING, 1995, 38 (04) :405-415

[12]

NAKAZAWA K, 1998, P 1998 JSME ANN M, P161

[13]

NISHIDA T, 1999, P 48 ANN M JAP SOC M, P117

[14]

NISHIOKA K, 1970, T JPN SOC MECH ENG, V36, P1805

[15]

Ogawa T., 1997, J SOC MAT SCI JPN, V46, P1124

[16] Fretting fatigue behavior of TiN-coated steel [J].

Okane, M ;

Shiozawa, K ;

Ishikura, T .

FRETTING FATIGUE: CURRENT TECHNOLOGY AND PRACTICES, 2000, 1367 :465-476

[17]

OKANE M, 1999, T JPN SOC MECH ENG A, V65, P827

[18]

SATOH T, 1990, T JAPAN SOC MECH ENG, V56, P1784

[19] Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC-Co coatings [J].

Stewart, DA ;

Shipway, PH ;

McCartney, DG .

WEAR, 1999, 225 :789-798

[20]

TANAKA K, 1985, T JPN SOC MECH ENG, V51, P1200

← 1 2 3 →