Optimisation of squirrel cage induction motors using finite element method and genetic algorithms

被引：0
|
作者：
Palko, S
Jokinen, T
机构：
来源：
EIGHTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND DRIVES | 1997年 / 444期
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The aim of the study is to find the best geometry for a squirrel cage induction motor satisfying the given requirements. The motor is modelled by the two-dimensional finite element method with a simulation of the rotating rotor. A genetic algorithm is used in optimisation. Two examples are presented in the paper. In the first example, the losses of an inverter fed motor are minimised under given constraints. In the second example, the task is to find the structure for the motor having a high locked rotor torque and low locked rotor current.
引用
收藏
页码：21 / 25
页数：5
相关论文
共 50 条
  • [1] Modelling squirrel cage induction motors using finite element method
    Ahmadi, M.
    Poshtan, J.
    Poshtan, M.
    2012 IEEE INTERNATIONAL CONFERENCE ON INTELLIGENT CONTROL, AUTOMATIC DETECTION AND HIGH-END EQUIPMENT (ICADE), 2012, : 186 - 191
  • [2] Finite element diagnosis of squirrel cage induction motors with rotor bar faults
    Tudorache, T.
    Taras, P.
    Fireteanu, V.
    PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOL II: POWER ELECTRONICS, ELECTRICAL MACHINES & DRIVERS, 2006, : 25 - 30
  • [3] Fault diagnosis of rotor bars in squirrel cage induction motors by time-stepping finite element method
    Kim, Chang-Eob
    Jung, Yong-Bae
    Yoon, Sang-Baeck
    Im, Dal-Ho
    IEEE Transactions on Magnetics, 1997, 33 (2 pt 2): : 2131 - 2134
  • [4] The fault diagnosis of rotor bars in squirrel cage induction motors by time-stepping finite element method
    Kim, CE
    Jung, YB
    Yoon, SB
    Im, DH
    IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (02) : 2131 - 2134
  • [5] Squirrel Cage Induction Motors
    S Afr Mech Eng, 1 (19):
  • [6] Finite Element Analysis and Diagnosis of the One Broken Bar Fault in the Squirrel Cage Induction Motors
    Fireteanu, Virgiliu
    Taras, Petrica
    Stamate, Marcel
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOLS 1-5, 2012, : 411 - 416
  • [7] Finite element analysis of steady state behavior of squirrel cage induction motors compared with measurements
    De Weerdt, R.
    Tuinman, E.
    Hameyer, K.
    Belmans, R.
    IEEE Transactions on Magnetics, 1997, 33 (2 pt 2): : 2093 - 2096
  • [8] Analysis of the mechanical stresses on a squirrel cage induction motor by the finite element method
    Jun, CH
    Nicolas, A
    IEEE TRANSACTIONS ON MAGNETICS, 1999, 35 (03) : 1282 - 1285
  • [9] Structural optimisation of an induction motor using a genetic algorithm and a finite element method
    Palko, S
    ACTA POLYTECHNICA SCANDINAVICA-ELECTRICAL ENGINEERING SERIES, 1996, (84): : 2 - 99
  • [10] Design approach of squirrel cage induction motors by use of an iron loss optimisation method for improving efficiency
    Saanane, BB
    Nzali, AH
    Chambega, DJ
    Computational Methods and Experimental Measurements XII, 2005, 41 : 621 - 629
12345