Cogging Torque Mitigation of Modular Permanent Magnet Machines

被引：19

作者：

Li, G. J. ^{[1
]}

Ren, B. ^{[1
]}

Zhu, Z. Q. ^{[1
]}

Li, Y. X. ^{[1
]}

Ma, J. ^{[1
]}

机构：

[1] Univ Sheffield, Sheffield S10 2TN, S Yorkshire, England

来源：

IEEE TRANSACTIONS ON MAGNETICS | 2016年 / 52卷 / 01期

关键词：

Cogging torque; modular machine; permanent magnet (PM); slot-opening (SOs) shift; torque ripple; REDUCTION; DESIGN; OPTIMIZATION; MOTORS; SHAPE;

D O I：

10.1109/TMAG.2015.2477489

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper proposes a novel cogging torque mitigation method for modular permanent magnet (PM) machines with flux gaps in alternate stator teeth. The slot openings (SOs) of the modular PM machines are divided into two groups in a special way. By shifting the SOs of two groups in opposite directions with the same angle, the machine cogging torque can be significantly reduced. An analytical formula of the desired shift angle is derived, and can be applicable to other modular machines with different slot/pole number combinations. Meanwhile, the influence of the proposed method on phase back electromotive force (EMF) is investigated, and the three-phaseback EMF waveforms remain balanced for all slot/pole number combinations after slot shifting. Experiments based on the existing prototypes are carried out to validate the finite-element modeling.

引用

页数：10

共 31 条

[21]

Saravanan S., 2011, 2011 1st International Conference on Electrical Energy Systems (ICEES), P149, DOI 10.1109/ICEES.2011.5725319

[22]

Spooner E, 1996, IEEE IND APPLIC SOC, P497, DOI 10.1109/IAS.1996.557073

[23] Modular design of permanent-magnet generators for wind turbines [J].

Spooner, E ;

Williamson, AC ;

Catto, G .

IEE PROCEEDINGS-ELECTRIC POWER APPLICATIONS, 1996, 143 (05) :388-395

[24]

Yang YB, 2007, C IND ELECT APPL, P265

[25]

Yubo Yang, 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications, P1028, DOI 10.1109/ICIEA.2009.5138357

[26] Synthesis of cogging-torque waveform from analysis of a single stator slot [J].

Zhu, Z. Q. ;

Ruangsinchaiwanich, S. ;

Howe, David .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2006, 42 (03) :650-657

[27] Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular Stators [J].

Zhu, Z. Q. ;

Azar, Z. ;

Ombach, G. .

IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (06) :2049-2055

[28]

Zhu ZQ, 2009, IEEE POW ENER SOC GE, P3424

[29] Reduction of cogging torque in interior-magnet brushless machines [J].

Zhu, ZQ ;

Ruangsinchaiwanich, S ;

Schofield, N ;

Howe, D .

IEEE TRANSACTIONS ON MAGNETICS, 2003, 39 (05) :3238-3240

[30] Influence of design parameters on cogging torque in permanent magnet machines [J].

Zhu, ZQ ;

Howe, D .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2000, 15 (04) :407-412

← 1 2 3 4 →