Cogging Torque Mitigation of Modular Permanent Magnet Machines

被引：19

作者：

Li, G. J. ^{[1
]}

Ren, B. ^{[1
]}

Zhu, Z. Q. ^{[1
]}

Li, Y. X. ^{[1
]}

Ma, J. ^{[1
]}

机构：

[1] Univ Sheffield, Sheffield S10 2TN, S Yorkshire, England

来源：

IEEE TRANSACTIONS ON MAGNETICS | 2016年 / 52卷 / 01期

关键词：

Cogging torque; modular machine; permanent magnet (PM); slot-opening (SOs) shift; torque ripple; REDUCTION; DESIGN; OPTIMIZATION; MOTORS; SHAPE;

D O I：

10.1109/TMAG.2015.2477489

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper proposes a novel cogging torque mitigation method for modular permanent magnet (PM) machines with flux gaps in alternate stator teeth. The slot openings (SOs) of the modular PM machines are divided into two groups in a special way. By shifting the SOs of two groups in opposite directions with the same angle, the machine cogging torque can be significantly reduced. An analytical formula of the desired shift angle is derived, and can be applicable to other modular machines with different slot/pole number combinations. Meanwhile, the influence of the proposed method on phase back electromotive force (EMF) is investigated, and the three-phaseback EMF waveforms remain balanced for all slot/pole number combinations after slot shifting. Experiments based on the existing prototypes are carried out to validate the finite-element modeling.

引用

页数：10

共 31 条

[1]

[Anonymous], 2014 ANN INT C EM RE

[2] Design techniques for reducing the cogging torque in surface-mounted PM motors [J].

Bianchi, N ;

Bolognani, S .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (05) :1259-1265

[3] Influence of machine symmetry on reduction of cogging torque in permanent-magnet brushless motors [J].

Bretón, C ;

Bartolomé, J ;

Benito, JA ;

Tassinario, G ;

Flotats, I ;

Lu, CW ;

Chalmers, BJ .

IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) :3819-3823

[4]

Chen Z., 1995, Seventh International Conference on Electrical Machines and Drives (Conf. Publ. No.412), P453, DOI 10.1049/cp:19950913

[5]

Dajaku G., 2014, Electric Drives Produciton Conference EDPC, P1

[6]

Dajaku G., 2012, ELECT MACHINES SYSTE, P1

[7]

Guowei Zhang, 2007, International Conference on Electrical Machines and Systems 2007, P856

[8] Reduction of cogging torque in spindle motors for CD-ROM drive [J].

Hwang, CC ;

John, SB ;

Wu, SS .

IEEE TRANSACTIONS ON MAGNETICS, 1998, 34 (02) :468-470

[9] Issues in reducing the cogging torque of mass-produced permanent-magnet brushless DC motor [J].

Islam, MS ;

Mir, S ;

Sebastian, T .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2004, 40 (03) :813-820

[10] Permanent-Magnet Synchronous Motor Magnet Designs With Skewing for Torque Ripple and Cogging Torque Reduction [J].

Islam, Rakib ;

Husain, Iqbal ;

Fardoun, Abbas ;

McLaughlin, Kevin .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2009, 45 (01) :152-160

← 1 2 3 4 →