Surface Modification of Polymer Powders by a Far Cold Remote Nitrogen Plasma in Fluidized Bed

被引：1

作者：

Aiche, Lynda ^{[1
,2
]}

Vergnes, Hugues ^{[2
]}

Despax, Bernard ^{[1
]}

Caussat, Brigitte ^{[2
]}

Caquineau, Hubert ^{[1
]}

机构：

[1] Lab Plasmas & Convers Energies, 118 Route Narbonne, F-31106 Toulouse, France

[2] ENSIACET, CNRS, INPT, Labo Genie Chim,UMR 5503, F-31106 Toulouse 1, France

来源：

INTERFACE CONTROLLED ORGANIC THIN FILMS | 2009年 / 129卷

关键词：

POLYETHYLENE POWDER; REACTOR;

D O I：

10.1007/978-3-540-95930-4_13

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work, nitrogen was grafted on the surface of polyethylene powders in a fluidized bed coupled to a nitrogen microwave post-discharge, under low pressure (10Torr) and low temperature (<90 degrees C). The influences of treatment-duration (1 to 9 h) and nitrogen flow-rate on the XPS (X-ray Photoelectron Spectroscopy) N/C atomic ratio and on the powder wettability have been studied.

引用

页码：79 / 83

页数：5

共 50 条

[31] Surface treatment of polymeric fine powders by CF4 plasma in a circulating fluidized bed reactor
Jung, SH
Park, SH
Kim, SD
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2004, 37 (02) : 166 - 173
[32] Microwave plasma characteristics of a circulating fluidized bed-plasma reactor for coating of powders
Karches, M
von Rohr, PR
SURFACE & COATINGS TECHNOLOGY, 2001, 142 : 28 - 33
[33] Plasma enhanced chemical vapor deposition on powders in a low temperature plasma fluidized bed
Bayer, C
Karches, M
Matthews, A
von Rohr, PR
CHEMICAL ENGINEERING & TECHNOLOGY, 1998, 21 (05) : 427 - 430
[34] Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet
Cheng, Cheng
Zhang Liye
Zhan, Ru-Juan
SURFACE & COATINGS TECHNOLOGY, 2006, 200 (24): : 6659 - 6665
[35] Plasma surface modification of powders for pharmaceutical applications
Roth, Christian
Kuensch, Zaira
Sonnenfeld, Axel
von Rohr, Philipp Rudolf
SURFACE & COATINGS TECHNOLOGY, 2011, 205 : S597 - S600
[36] Statistical and deterministic chaos analysis of pressure fluctuations in a fluidized bed of polymer powders
See Hoon Lee
Sang Done Kim
Soung Hee Park
Korean Journal of Chemical Engineering, 2002, 19 : 1020 - 1025
[37] Statistical and deterministic chaos analysis of pressure fluctuations in a fluidized bed of polymer powders
Lee, SH
Kim, SD
Park, SH
KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2002, 19 (06) : 1020 - 1025
[38] Surface modification of aluminum using ion nitriding and fluidized bed
Okumiya, M
Tsunekawa, Y
Murayama, T
SURFACE & COATINGS TECHNOLOGY, 2001, 142 : 235 - 240
[39] Treatment of a polyethylene powder using a remote nitrogen plasma reactor coupled with a fluidized bed: Influence on wettability and flowability
Leroy, JB
Fatah, N
Mutel, B
Grimblot, J
PLASMAS AND POLYMERS, 2003, 8 (01) : 13 - 29
[40] Surface modification of carbon felt by cold remote plasma for glucose oxidase enzyme immobilization
Kahoush, May
Behary, Nemeshwaree
Cayla, Aurelie
Mutel, Brigitte
Guan, Jinping
Nierstrasz, Vincent
APPLIED SURFACE SCIENCE, 2019, 476 : 1016 - 1024

← 1 2 3 4 5 →