Surface Modification of Polymer Powders by a Far Cold Remote Nitrogen Plasma in Fluidized Bed

被引：1

作者：

Aiche, Lynda ^{[1
,2
]}

Vergnes, Hugues ^{[2
]}

Despax, Bernard ^{[1
]}

Caussat, Brigitte ^{[2
]}

Caquineau, Hubert ^{[1
]}

机构：

[1] Lab Plasmas & Convers Energies, 118 Route Narbonne, F-31106 Toulouse, France

[2] ENSIACET, CNRS, INPT, Labo Genie Chim,UMR 5503, F-31106 Toulouse 1, France

来源：

INTERFACE CONTROLLED ORGANIC THIN FILMS | 2009年 / 129卷

关键词：

POLYETHYLENE POWDER; REACTOR;

D O I：

10.1007/978-3-540-95930-4_13

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work, nitrogen was grafted on the surface of polyethylene powders in a fluidized bed coupled to a nitrogen microwave post-discharge, under low pressure (10Torr) and low temperature (<90 degrees C). The influences of treatment-duration (1 to 9 h) and nitrogen flow-rate on the XPS (X-ray Photoelectron Spectroscopy) N/C atomic ratio and on the powder wettability have been studied.

引用

页码：79 / 83

页数：5

共 50 条

[21] Cold plasma treatment: Surface or bulk modification of polymer films?
PoncinEpaillard, F
Brosse, JC
Falher, T
MACROMOLECULES, 1997, 30 (15) : 4415 - 4420
[22] Cold Plasma Surface Modification of PLA and LDPE Polymer Plastics
Leluk, Karol
ROCZNIK OCHRONA SRODOWISKA, 2023, 25 : 141 - 147
[23] Surface modification of particles in a photochemical fluidized bed
Barbosa, Ana Paula Michels
Barros, Lillian Medeiros
Moreira, Marcia Ines Rodrigues
Rolda, Caroline Pereira
de Souza, Taiana Denardi
Kessler, Felipe
Felipe, Carlos Alberto Severo
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2024, 196
[24] Functionalization of Polymer Powders for SLS-Processes using an Atmospheric Plasma Jet in a Fluidized Bed Reactor
Sachs, Marius
Schmitt, Adeliene
Schmidt, Jochen
Peukert, Wolfgang
Wirth, Karl-Ernst
PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 2015, 1664
[25] Polymer Functionalization and Thin Film Deposition by Remote Cold Nitrogen Plasma Process
Mutel, Brigitte
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2008, 22 (10-11) : 1035 - 1055
[26] Effects of the addition of hydrogen in the nitrogen cold plasma: The surface modification of polystyrene
Wang, MJ
Chang, YI
Poncin-Epaillard, F
LANGMUIR, 2003, 19 (20) : 8325 - 8330
[27] PLASMA SURFACE MODIFICATION OF POLYMER POWDERS WITH APPLICATION TO THERMAL-ENERGY STORAGE
LOH, IH
COHEN, RE
BADDOUR, RF
JOURNAL OF APPLIED POLYMER SCIENCE, 1986, 31 (03) : 901 - 910
[28] A downer reactor for short-time plasma surface modification of polymer powders
Arpagaus, C
Sonnenfeld, AE
von Rohr, PR
CHEMICAL ENGINEERING & TECHNOLOGY, 2005, 28 (01) : 87 - 94
[29] Nanoscale Plasma Surface Modification of Powders
Roth, C.
Sonnenfeld, A.
von Rohr, Ph Rudolf
NANOTECHNOLOGY 2011: ADVANCED MATERIALS, CNTS, PARTICLES, FILMS AND COMPOSITES, NSTI-NANOTECH 2011, VOL 1, 2011, : 225 - 228
[30] Use of a COAX-DBD Plasma Fluidized-Bed Reactor for Surface Modification of TiO2 and Potato-Starch Powders
Augusto Garcia-Guerrero, Enrique
de Jesus Nieto-Perez, Martin
Lopez-Echevarria, Gerardo
Tirado-Guerrero, Michelle
Adalberto Huerta-Ruelas, Jorge
del Carmen Mendez-Montealvo, Ma. Guadalupe
Velazquez, Gonzalo
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2018, 46 (07) : 2425 - 2434

← 1 2 3 4 5 →