Surface Modification of Polymer Powders by a Far Cold Remote Nitrogen Plasma in Fluidized Bed

被引：1

作者：

Aiche, Lynda ^{[1
,2
]}

Vergnes, Hugues ^{[2
]}

Despax, Bernard ^{[1
]}

Caussat, Brigitte ^{[2
]}

Caquineau, Hubert ^{[1
]}

机构：

[1] Lab Plasmas & Convers Energies, 118 Route Narbonne, F-31106 Toulouse, France

[2] ENSIACET, CNRS, INPT, Labo Genie Chim,UMR 5503, F-31106 Toulouse 1, France

来源：

INTERFACE CONTROLLED ORGANIC THIN FILMS | 2009年 / 129卷

关键词：

POLYETHYLENE POWDER; REACTOR;

D O I：

10.1007/978-3-540-95930-4_13

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work, nitrogen was grafted on the surface of polyethylene powders in a fluidized bed coupled to a nitrogen microwave post-discharge, under low pressure (10Torr) and low temperature (<90 degrees C). The influences of treatment-duration (1 to 9 h) and nitrogen flow-rate on the XPS (X-ray Photoelectron Spectroscopy) N/C atomic ratio and on the powder wettability have been studied.

引用

页码：79 / 83

页数：5

共 50 条

[1] Surface property modification of a polyethylene powder by coupling fluidized bed and far cold remote nitrogen plasma technologies
Vivien, C
Wartelle, C
Mutel, B
Grimblot, J
SURFACE AND INTERFACE ANALYSIS, 2002, 34 (01) : 575 - 579
[2] Far cold remote nitrogen plasma for surface modification and film deposition
Dessaux, O
Goudmand, P
Jama, C
SURFACE & COATINGS TECHNOLOGY, 1998, 100 (1-3): : 38 - 44
[3] Low temperature silicon oxide deposition on polymer powders in a fluidized bed coupled to a cold remote plasma
Caquineau, H.
Aiche, L.
Vergnes, H.
Despax, B.
Caussat, B.
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (23): : 4814 - 4821
[4] Surface modification of HDPE powders by oxygen plasma in a circulating fluidized bed reactor
Jung, SH
Park, SH
Lee, DH
Kim, SD
POLYMER BULLETIN, 2001, 47 (02) : 199 - 205
[5] Surface modification of HDPE powders by oxygen plasma in a circulating fluidized bed reactor
Soon Hwa Jung
Soung Hee Park
Dong Hyun Lee
Sang Done Kim
Polymer Bulletin, 2001, 47 : 199 - 205
[6] Surface modification of fine powders by atmospheric pressure plasma in a circulating fluidized bed reactor
Jung, SH
Park, SM
Park, SH
Kim, SD
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2004, 43 (18) : 5483 - 5488
[7] Plasma deposition of allylamine on polymer powders in a fluidized bed reactor
Tatoulian, M
Brétagnol, FR
Arefi-Khonsari, F
Amouroux, J
Bouloussa, O
Rondelez, F
Paul, AJ
Mitchell, R
PLASMA PROCESSES AND POLYMERS, 2005, 2 (01) : 38 - 44
[8] Surface modification of polyethylene powder by nitrogen and ammonia low pressure plasma in a fluidized bed reactor
Bretagnol, F
Tatoulian, M
Arefi-Khonsari, F
Lorang, G
Amouroux, J
REACTIVE & FUNCTIONAL POLYMERS, 2004, 61 (02): : 221 - 232
[9] Surface modification of particles in a plasma jet fluidized bed reactor
Hanabusa, T
Uemiya, S
Kojima, T
SURFACE & COATINGS TECHNOLOGY, 1997, 88 (1-3): : 226 - 231
[10] Treatment of polymer powders by combining an atmospheric plasma jet and a fluidized bed reactor
Sachs, Marius
Schmidt, Jochen
Peukert, Wolfgang
Wirth, Karl-Ernst
POWDER TECHNOLOGY, 2018, 325 : 490 - 497

← 1 2 3 4 5 →