A study on the surface free energy of modified silica fillers and poly(ethylene terephthalate) fibers by inverse gas chromatography

The surface free energy of modified silica fillers and poly(ethylene terephthalate) (PET) fibers was analyzed by inverse gas chromatography in order to investigate the relationship between their surface characteristics and the performance of the composite formed from these materials. The adsorption isotherms of n-heptane and l-propanol were determined by the elution-peak-maximum method. The dispersive and polar components of the surface free energy were determined by use of the Young-Dupre equation and the Fowkes equation on the basis of the saturated spreading pressure derived from the Gibbs adsorption equation. The acidity and the basicity of the surface were estimated by the specific retention volume of each probe molecule with different donor number and acceptor number. It was found that the dispersive component of the surface free energy for modified silica fillers was mostly lower than that for original silica filler. The polar component of the surface free energy for ethylene glycol modified silica fillet became large, while that for n-butanol modified silica filler decreased remarkably. It was also found that original silica filler exhibited high acidity, while modified silica fillers exhibited low acidity. Although these methods have been applied to PET fibers, the surface free energy could not be determined quantitatively because of the surface change during the pretreatment of PET fibers, It was observed that the polar component of the surface free energy decreased when the pretreatment was made at a temperature higher than the glass-transition temperature of PET. It became clear that the interaction between modified silica fillers and PET fibers correlated well with the basicity of the fillers, but not with their acidity.