Anchors for CFRP plates: State-of-the-art review and future potential

被引：81
作者：
Mohee, Faizul M. [1 ]
Al-Mayah, Adil [1 ,2 ]
Plumtree, Alan [2 ]
机构：
[1] Univ Waterloo, Dept Civil & Environm Engn, 200 Univ Ave West, Waterloo, ON N2L 3G1, Canada
[2] Univ Waterloo, Dept Mech & Mechatron Engn, 200 Univ Ave West, Waterloo, ON N2L 3G1, Canada
来源：
COMPOSITES PART B-ENGINEERING | 2016年 / 90卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
Laminates; Mechanical properties; Numerical analysis; Mechanical testing; STRENGTH UNIDIRECTIONAL COMPOSITES; STRESS-STRAIN ANALYSIS; LOAD-TRANSFER ZONE; UNIAXIAL TENSION; FRP COMPOSITES; FLAT SPECIMENS; CONCRETE BEAMS; RC BEAMS; POLYMER COMPOSITES; BASALT FIBER;
D O I：
10.1016/j.compositesb.2016.01.011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to utilize the high tensile strength of the carbon fibre-reinforced-polymer (CFRP) plate, prestressing of the plate is recommended. End-anchors are required for the prestressing of the CFRP plate. Although a number of anchors have been developed, the literature lacks a review of the existing CFRP plate anchors. This article presents a state-of-the-art review of the available anchors for CFRP plates. The strength, performance, design parameters and failure modes of the anchors have been discussed. Barriers to the commercial use of the existing anchors include unconventional manufacturing, complicated installation steps, large size and high cost. An overall assessment of the existing CFRP plate anchors, considering industry requirements, has led to suggestions on research and development priorities. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：432 / 442
页数：11
相关论文
共 114 条
[1]   Effect of sandblasting on interfacial contact behavior of carbon-fiber-reinforced polymer-metal couples [J].
Al-Mayah, A ;
Soudki, K ;
Plumtree, A .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2005, 9 (04) :289-295
[2]  
Andra H, 2003, United States Patent, Patent, Patent No. [US 6,584,738 B1, 65847382003]
[3]  
Andra H, 2007, United States Patent, Patent, Patent No. [US 7,296,385 B2, 72963852007]
[4]  
Andra H, 2010, United States Patent, Patent, Patent No. [US 7,658,041 B2, 76580412010]
[5]  
Andra H, 2008, United States Patent, Patent, Patent No. [US 7,441,380 B2, 74413802008]
[6]  
Andra H, 2006, United States Patent, Patent, Patent No. [US 2006/0272246 A1, 20060272246]
[7]  
Andra H.P., 2000, IABSE Con- gress Report, V16, P1507
[8]  
[Anonymous], 2014, D3039 ASTM
[9]  
[Anonymous], 2012, 440 ACI
[10]  
[Anonymous], 2014, 440 ACI, P1
12345678910