Effects of strain rate on tensile properties of TZM and Mo-5%Re

被引：29

作者：

Filacchioni, G ^{[1
]}

Casagrande, E ^{[1
]}

De Angelis, U ^{[1
]}

De Santis, G ^{[1
]}

Ferrara, D ^{[1
]}

机构：

[1] ENEA, CR CASACCIA, New Mat Div, Sect Technol & Mat Qualificat, I-00060 Rome, Italy

来源：

JOURNAL OF NUCLEAR MATERIALS | 2002年 / 307卷 / 1 SUPPL.期

关键词：

D O I：

10.1016/S0022-3115(02)01191-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present work, we have studied the strain rate sensitivity of tensile properties of TZM and Mo-5%Re alloys. Tests were performed at room temperature and around the transition temperature of each alloy, at strain rates varying over five decades. Ductility appeared insensitive to strain rate, whereas the strength is found to be strain rate dependent. Both proof stress and ultimate tensile strength are affected by strain rate and the Mo-5%Re alloy is more sensitive than TZM. As expected, the hardening decreases with temperature; in TZM alloy the strain rate sensitivity was apparent only at room temperature. (C) 2002 Elsevier Science B.V. All rights reserved.

引用

页码：705 / 709

页数：5

共 7 条

[1] PARAMETER REPRESENTATION OF LOW-TEMPERATURE YIELD BEHAVIOR OF BODY-CENTERED CUBIC TRANSITION METALS [J].

BENNETT, PE ;

SINCLAIR, GM .

JOURNAL OF BASIC ENGINEERING, 1966, 88 (02) :518-&

[2] TENSILE AND IMPACT PROPERTIES OF TZM AND MO-5-PERCENT RE [J].

FILACCHIONI, G ;

CASAGRANDE, E ;

DEANGELIS, U ;

DESANTIS, G ;

FERRARA, D .

JOURNAL OF NUCLEAR MATERIALS, 1994, 212 :1288-1291

[3] HIGH-Z PLASMA-FACING AND RELATED MATERIALS [J].

KALININ, GM .

JOURNAL OF NUCLEAR MATERIALS, 1991, 179 :1193-1198

[4]

KURODA T, 1991, IAEAITERDS30

[5]

POTT M, 1992, M DIV STRUCT MAT R D

[6]

RYBIN VV, 1992, J NUCL MATER A, V191, P31

[7] Analysis of tensile and fracture toughness results on irradiated molybdenum alloys, TZM and Mo-5%Re [J].

Scibetta, M ;

Chaouadi, R ;

Puzzolante, JL .

JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) :455-460

← 1 →