Effect of microstructural evolution in thermal exposure on mechanical properties of HP40Nb alloy

被引：14
作者：
Fuyang, Cheng-ming [1 ,2 ]
Chen, Jin-yan [1 ,2 ]
Shao, Bing [1 ,2 ]
Zhou, Yang [1 ,2 ]
Gong, Jian-ming [1 ,2 ]
Guo, Xiao-feng [3 ]
Jiang, Yong [1 ,2 ]
机构：
[1] Nanjing Tech Univ, Sch Mech & Power Engn, Nanjing, Peoples R China
[2] Key Lab Design & Manufacture Extreme Pressure Equ, Nanjing, Peoples R China
[3] Inner Mongolia Univ Sci & Technol, Sch Mech Engn, Baotou, Peoples R China
来源：
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2021年 / 192卷
基金：
中国国家自然科学基金;
关键词：
HP40Nb alloy; TTT diagram; Microstructure; Mechanical properties; AS-CAST; NIOBIUM CARBIDE; HP; CRYSTALLOGRAPHY; MORPHOLOGY; TUNGSTEN; SEM;
D O I：
10.1016/j.ijpvp.2021.104391
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The phase transformation of HP40Nb alloy at various temperatures and times was investigated and the microstructural evolution in aging process was characterised. Additionally, the mechanical tests were implemented for aged specimens. Experimental results indicate the microstructure of as-cast alloy consists of the austenite matrix with skeletal-shaped primary carbides. NbC carbide changes into G phase from 700(.)C degrees to 990 degrees C, and the nose temperature of transformation ranges from 900 degrees C to 950 degrees C. M7C3 carbide tends to transform into M23C6 carbide at higher temperature. Meanwhile, numerous secondary carbides are precipitated in the initial aging stage and dissolves gradually in further process. The interdendritic precipitates coalesce and coarsen continuously in aging treatment. The tensile strengths and the micro-hardness increase slightly followed by the continuous reduction in exposure, while the elongation and impact toughness decrease continuously. The microstructural evolution during aging process is consistent with the variation of mechanical properties.
引用
收藏
页数：11
相关论文
共 31 条
[11]  
Caballero F.G., 2013, MATER SCI TECH-LOND, V23, P528
[12]   Characterisation of 20Cr32Ni1Nb alloys in as-cast and Ex-Service conditions by SEM, TEM and EDX [J].
Chen, QZ ;
Thomas, CW ;
Knowles, DM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 374 (1-2) :398-408
[13]   Carburization of Ethylene Pyrolysis Furnace Tube in a Petrochemical Plant [J].
Chen, Tao ;
Chen, Xuedong ;
Liu, Chunjiao ;
Ye, Juan ;
Nie, Defu .
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (06)
[14]  
de Almeida L.H., 2002, Materials Characterization, V49, P219, DOI DOI 10.1016/S1044-5803(03)00013-5
[15]   Feasibility assessment of local repairment for reformer furnace tubes in service exposure [J].
Fuyang, Cheng-ming ;
Zhu, Rui ;
Zhang, Peng-peng ;
Guo, Xiao-feng ;
Li, Heng ;
Geng, Lu-yang ;
Gong, Jian-ming .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2020, 179
[16]   Damage assessment and maintenance strategy of hydrogen reformer furnace tubes [J].
Gong, JM ;
Tu, ST ;
Yoon, KB .
ENGINEERING FAILURE ANALYSIS, 1999, 6 (03) :143-153
[17]   Effect of long-term aging on microstructural stabilization and mechanical properties of 20Cr32Ni1Nb steel [J].
Guo, Xiaofeng ;
Jia, Xiankai ;
Gong, Jianming ;
Geng, Luyang ;
Tang, Jianqun ;
Jiang, Yong ;
Ni, Yingying ;
Yang, Xinyu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 690 :62-70
[18]   Structure and phase stability in a cast modified-HP austenite after long-term ageing [J].
Kenik, EA ;
Maziasz, PJ ;
Swindeman, RW ;
Cervenka, J ;
May, D .
SCRIPTA MATERIALIA, 2003, 49 (02) :117-122
[19]   Fragmented structure of niobium carbide particles in as-cast modified HP alloys [J].
Kondrat'ev, Sergey Yu. ;
Sviatysheva, Ekaterina V. ;
Anastasiadi, Grigoriy P. ;
Petrov, Sergey N. .
ACTA MATERIALIA, 2017, 127 :267-276
[20]   Experimental observation and crystallographic description of M7C3 carbide transformation in Fe-Cr-Ni-C HP type alloy [J].
Kondrat'ev, Sergey Yu. ;
Kraposhin, Valentin S. ;
Anastasiadi, Grigoriy P. ;
Talis, Alexander L. .
ACTA MATERIALIA, 2015, 100 :275-281
1234