Effect of microstructural evolution in thermal exposure on mechanical properties of HP40Nb alloy

被引：14
作者：
Fuyang, Cheng-ming [1 ,2 ]
Chen, Jin-yan [1 ,2 ]
Shao, Bing [1 ,2 ]
Zhou, Yang [1 ,2 ]
Gong, Jian-ming [1 ,2 ]
Guo, Xiao-feng [3 ]
Jiang, Yong [1 ,2 ]
机构：
[1] Nanjing Tech Univ, Sch Mech & Power Engn, Nanjing, Peoples R China
[2] Key Lab Design & Manufacture Extreme Pressure Equ, Nanjing, Peoples R China
[3] Inner Mongolia Univ Sci & Technol, Sch Mech Engn, Baotou, Peoples R China
来源：
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2021年 / 192卷
基金：
中国国家自然科学基金;
关键词：
HP40Nb alloy; TTT diagram; Microstructure; Mechanical properties; AS-CAST; NIOBIUM CARBIDE; HP; CRYSTALLOGRAPHY; MORPHOLOGY; TUNGSTEN; SEM;
D O I：
10.1016/j.ijpvp.2021.104391
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The phase transformation of HP40Nb alloy at various temperatures and times was investigated and the microstructural evolution in aging process was characterised. Additionally, the mechanical tests were implemented for aged specimens. Experimental results indicate the microstructure of as-cast alloy consists of the austenite matrix with skeletal-shaped primary carbides. NbC carbide changes into G phase from 700(.)C degrees to 990 degrees C, and the nose temperature of transformation ranges from 900 degrees C to 950 degrees C. M7C3 carbide tends to transform into M23C6 carbide at higher temperature. Meanwhile, numerous secondary carbides are precipitated in the initial aging stage and dissolves gradually in further process. The interdendritic precipitates coalesce and coarsen continuously in aging treatment. The tensile strengths and the micro-hardness increase slightly followed by the continuous reduction in exposure, while the elongation and impact toughness decrease continuously. The microstructural evolution during aging process is consistent with the variation of mechanical properties.
引用
收藏
页数：11
相关论文
共 31 条
[1]   Damage characterization in two reformer heater tubes after nearly 10 years of service at different operative and maintenance conditions [J].
Alvino, Antonello ;
Lega, Daniela ;
Giacobbe, Francesco ;
Mazzocchi, Vittorio ;
Rinaldi, Antonio .
ENGINEERING FAILURE ANALYSIS, 2010, 17 (7-8) :1526-1541
[2]   Titanium micro addition in a centrifugally cast HPNb alloy: High temperature mechanical properties [J].
Andrade, A. R. ;
Bolfarini, C. ;
Ferreira, L. A. M. ;
Souza Filho, C. D. ;
Bonazzi, L. H. C. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 636 :48-52
[3]   Influence of niobium addition on the high temperature mechanical properties of a centrifugally cast HP alloy [J].
Andrade, A. R. ;
Bolfarini, C. ;
Ferreira, L. A. M. ;
Vilar, A. A. A. ;
Souza Filho, C. D. ;
Bonazzi, L. H. C. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 :176-180
[4]  
[Anonymous], 2014, A608A608M ASTM
[5]   Microstructural evolution in creep aged of directionally solidified heat resistant HP-Nb steel alloyed with tungsten and nitrogen [J].
Attarian, M. ;
Taheri, A. Karimi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 659 :104-118
[6]  
Augustin C., 2020, MATERIALIA, V9
[7]   Damage analysis in Fe-Cr-Ni centrifugally cast alloy tubes for reforming furnaces [J].
Bonaccorsi, L. ;
Guglielmino, E. ;
Pino, R. ;
Servetto, C. ;
Sili, A. .
ENGINEERING FAILURE ANALYSIS, 2014, 36 :65-74
[8]   Crystallography and Morphology of MC Carbides in Niobium-Titanium Modified As-Cast HP Alloys [J].
Buchanan, Karl G. ;
Kral, Milo V. ;
Bishop, Catherine M. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (08) :3373-3385
[9]   Crystallography and Morphology of Niobium Carbide in As-Cast HP-Niobium Reformer Tubes [J].
Buchanan, Karl G. ;
Kral, Milo V. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (06) :1760-1769
[10]  
Burke K.E., 1975, Metallography, V8, P473, DOI 10.1016/0026-0800(75)90023-3
1234