The Effect of Secondary Gamma-Prime on the Primary Creep Behavior of Single-Crystal Nickel-Base Superalloys

被引:39
作者
Wilson, B. C. [1 ]
Fuchs, G. E. [1 ]
机构
[1] Univ Florida, Dept Mat Sci & Engn, Gainesville, FL 32611 USA
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2010年 / 41A卷 / 05期
基金
美国国家科学基金会;
关键词
LATTICE MISFIT; CMSX-4; 750-DEGREES-C; MECHANISMS; PHASE; SHEAR;
D O I
10.1007/s11661-009-9979-x
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Some second-, third-, and fourth-generation single-crystal Ni-base superalloys (i.e., Re-containing alloys) have demonstrated the propensity for excessive primary creep at intermediate temperatures. This behavior has been attributed to the presence of secondary gamma-prime precipitates in the gamma channels as well as on the Re content of the alloys. This investigation examined creep behavior for a common first-generation alloy, PWA 1480, a common second-generation alloy, PWA 1484, as well as a modified first-generation alloy, PWA 1480, with 3 wt pct rhenium added. In addition, two different aging heat treatments were given to each alloy to either precipitate or prevent the formation of fine (nanometer-scale) secondary gamma-prime in the gamma channels. The intermediate creep properties and tensile properties of the alloys were determined for both conditions. The microstructures of these samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), and then the role of the fine-scale microstructure and the alloy composition on the primary creep deformation was determined.
引用
收藏
页码:1235 / 1245
页数:11
相关论文
共 20 条
  • [1] Blavette D., 1988, SUPERALLOYS 1988, P305
  • [2] The influence of the dendritic structure on the γ/γ′-lattice misfit in the single-crystal nickel-base super-alloy CMSX-4
    Bruckner, U
    Epishin, A
    Link, T
    Dressel, K
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 247 (1-2): : 23 - 31
  • [3] Cetel A.D., 1988, P INT S SUPERALLOYS, P235
  • [4] Mechanism of ⟨1 1 2⟩/3 slip initiation and anisotropy of γ′ phase in CMSX-4 during creep at 750 °C and 750 MPa
    Chen, QZ
    Knowles, DM
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2): : 352 - 367
  • [5] Darolia R., 1988, SUPERALLOYS 1988, P255
  • [6] DONGLIANG L, 1984, SUPERALLOYS 1984, P199
  • [7] RHENIUM ADDITIONS TO A NI-BASE SUPERALLOY - EFFECTS ON MICROSTRUCTURE
    GIAMEI, AF
    ANTON, DL
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (11): : 1997 - 2005
  • [8] Harada H, 2001, MATERIALS DESIGN APPROACHES AND EXPERIENCES, P29
  • [9] Kakehi K, 2000, MAT SCI ENG A-STRUCT, V278, P135, DOI 10.1016/S0921-5093(99)00579-1
  • [10] Superlattice stacking fault formation and twinning during creep in γ/γ′ single crystal superalloy CMSX-4
    Knowles, DM
    Chen, QZ
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 340 (1-2): : 88 - 102