Microstructure, hardness, and shear behavior of Sn3.0Ag0.5Cu?Sn58Bi composite solder joint

被引：7

作者：

Liu, Yang ^{[1
]}

Liu, Li ^{[1
]}

Xu, Ruisheng ^{[1
]}

Sun, Fenglian ^{[1
]}

Zhu, Dongdong ^{[2
]}

Xu, Haitao ^{[2
]}

机构：

[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin, Heilongjiang, Peoples R China

[2] Quzhou Univ, Key Lab Air Driven Equipment Technol Zhejiang Pro, Quzhou, Peoples R China

来源：

MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 11期

基金：

中国国家自然科学基金;

关键词：

SnAgCu; SnBi; microstructure; hardness; shear behavior; MECHANICAL-PROPERTIES; RELIABILITY; EVOLUTION;

D O I：

10.1088/2053-1591/ab508e

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, Sn3.0Ag0.5Cu-Sn58Bi (SAC-SnBi) composite solder joint was obtained by two-step soldering process. The microstructure, hardness, and shear performance of the composite solder joint were investigated in comparison with the eutectic Sn58Bi (SnBi) and SnAgCu (SAC) solder joints. Experimental results showed that the SAC-SnBi had similar intermetallic compound (IMC) morphology and thickness with the SAC solder joints. Compared with the eutectic SnBi solder, the large Bi-rich matrix transforms into tiny Bi-rich grains in the SAC-SnBi solder bulk. Tiny Bi-rich grains, Cu6Sn5, and Ag3Sn distribute uniformly in the composite solder bulk. As the SnBi bulk melts into the SAC solder during the second soldering process, the formation and growth of large ?-Sn dendritic in SAC solder is suppressed in the composite solder. Therefore, the SAC-SnBi composite joint shows higher hardness and shear strength than the other two.

引用

页数：7

共 50 条

[21] Effects of bump size on deformation and fracture behavior of Sn3.0Ag0.5Cu/Cu solder joints during shear testing
Tian, Yanhong
Hang, Chunjin
Wang, Chunqing
Yang, Shihua
Lin, Pengrong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529 : 468 - 478
[22] Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint
Bashir, Muhammad Nasir
Haseeb, A. S. M. A.
Naher, Sumsun
Ali, Muhammad Mahmood
Bashir, Mohamed Bashir Ali
Zaidi, Asad A. A.
Jamshaid, Muhammad
Javed, Iqra
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (04)
[23] VOLUME EFFECT OF SHEAR FRACTURE BEHAVIOR OF Sn3.0Ag0.5Cu/Cu LEAD-FREE SOLDER JOINTS
Tian Yanhong
Yang Shihua
Wang Chunqing
Wang Xuelin
Lin Pengrong
ACTA METALLURGICA SINICA, 2010, 46 (03) : 366 - 371
[24] Effects of GNSs addition on the electromigration of Sn58Bi and Cu-core Sn58Bi joint
Liu, Peng
Guo, Weiqi
Wu, Ping
JOURNAL OF MATERIALS SCIENCE, 2022, 57 (32) : 15598 - 15611
[25] Electromigration behavior of Cu/Sn3.0Ag0.5Cu/Cu ball grid array solder joints
Jiang, Yiming
Li, Hailong
Chen, Gang
Mei, Yunhui
Wang, Meiyu
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (06) : 6224 - 6233
[26] Effect of Sn-Ag-Cu on the Improvement of Electromigration Behavior in Sn-58Bi Solder Joint
Fengjiang Wang
Lili Zhou
Zhijie Zhang
Jiheng Wang
Xiaojing Wang
Mingfang Wu
Journal of Electronic Materials, 2017, 46 : 6204 - 6213
[27] Effect of Sn-Ag-Cu on the Improvement of Electromigration Behavior in Sn-58Bi Solder Joint
Wang, Fengjiang
Zhou, Lili
Zhang, Zhijie
Wang, Jiheng
Wang, Xiaojing
Wu, Mingfang
JOURNAL OF ELECTRONIC MATERIALS, 2017, 46 (10) : 6204 - 6213
[28] DYNAMIC RECRYSTALLIZATION of Sn3.0Ag0.5Cu Pb-FREE SOLDER ALLOY
Holdermann, Ken
Cuddalorepatta, Gayatri
Dasgupta, Abhijit
IMECE2008: PROCEEDINGS OF THE INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2008, VOL 6, 2009, : 163 - 169
[29] Microstructure and mechanical properties of as-reflowed Sn58Bi composite solder pastes
Liu , Yang
Fu, Haifeng
Sun, Fenglian
Zhang, Hao
Kong, Xiangxia
Xin, Tong
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 238 : 290 - 296
[30] Effect of Shearing Speed and UBMs on High Speed Shear Properties of Sn3.0Ag0.5Cu Solder Ball
Jung, Do-Hyun
Lee, Wang-Gu
Jung, Jae Pil
KOREAN JOURNAL OF METALS AND MATERIALS, 2011, 49 (08): : 635 - 641

← 1 2 3 4 5 →