Microstructure, hardness, and shear behavior of Sn3.0Ag0.5Cu?Sn58Bi composite solder joint

被引：7
|
作者：
Liu, Yang [1 ]
Liu, Li [1 ]
Xu, Ruisheng [1 ]
Sun, Fenglian [1 ]
Zhu, Dongdong [2 ]
Xu, Haitao [2 ]
机构：
[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin, Heilongjiang, Peoples R China
[2] Quzhou Univ, Key Lab Air Driven Equipment Technol Zhejiang Pro, Quzhou, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 11期
基金：
中国国家自然科学基金;
关键词：
SnAgCu; SnBi; microstructure; hardness; shear behavior; MECHANICAL-PROPERTIES; RELIABILITY; EVOLUTION;
D O I：
10.1088/2053-1591/ab508e
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, Sn3.0Ag0.5Cu-Sn58Bi (SAC-SnBi) composite solder joint was obtained by two-step soldering process. The microstructure, hardness, and shear performance of the composite solder joint were investigated in comparison with the eutectic Sn58Bi (SnBi) and SnAgCu (SAC) solder joints. Experimental results showed that the SAC-SnBi had similar intermetallic compound (IMC) morphology and thickness with the SAC solder joints. Compared with the eutectic SnBi solder, the large Bi-rich matrix transforms into tiny Bi-rich grains in the SAC-SnBi solder bulk. Tiny Bi-rich grains, Cu6Sn5, and Ag3Sn distribute uniformly in the composite solder bulk. As the SnBi bulk melts into the SAC solder during the second soldering process, the formation and growth of large ?-Sn dendritic in SAC solder is suppressed in the composite solder. Therefore, the SAC-SnBi composite joint shows higher hardness and shear strength than the other two.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Effect of isothermal aging on the microstructure, shear behavior and hardness of the Sn58Bi/Sn3.0Ag0.5Cu/Cu solder joints
    Xu, Ruisheng
    Liu, Yang
    Sun, Fenglian
    RESULTS IN PHYSICS, 2019, 15
  • [2] Microstructure and shear behavior of solder joint with Sn58Bi/Sn3.0Ag0.5Cu/Cu superposition structure
    Liu, Yang
    Xu, Ruisheng
    Zhang, Hao
    Sun, Fenglian
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (15) : 14077 - 14084
  • [3] Electromigration behavior of Sn3.0Ag0.5Cu/Sn58Bi structural composite solder interconnect
    Wang, Fengjiang
    Zhou, Lili
    Wang, Xiaojing
    2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 268 - 272
  • [4] Microstructure and shear behavior of Sn58Bi/Cu solder joint enhanced by SnAgCuBiNi bump
    Liu, Yang
    Chang, Jian
    Zhou, Min
    Xue, Yuxiong
    Zeng, Xianghua
    Sun, Fenglian
    MODERN PHYSICS LETTERS B, 2020, 34 (36):
  • [5] Evolution of the Microstructure of Sn58Bi Solder Paste with Sn-3.0Ag-0.5Cu Addition During Isothermal Aging
    Xu, Ruisheng
    Liu, Yang
    Zhang, Hao
    Li, Zhao
    Sun, Fenglian
    Zhang, Guoqi
    JOURNAL OF ELECTRONIC MATERIALS, 2019, 48 (03) : 1758 - 1765
  • [6] Electromigration Behavior of Sn58Bi and Sn58Bi Epoxy Solder Joint
    Lee, Choong-Jae
    Kim, Jae-Ha
    Jeong, Haksan
    Bang, Jae-Oh
    Jung, Seung-Boo
    SCIENCE OF ADVANCED MATERIALS, 2020, 12 (04) : 538 - 543
  • [7] Evolution of the Microstructure of Sn58Bi Solder Paste with Sn-3.0Ag-0.5Cu Addition During Isothermal Aging
    Ruisheng Xu
    Yang Liu
    Hao Zhang
    Zhao Li
    Fenglian Sun
    Guoqi Zhang
    Journal of Electronic Materials, 2019, 48 : 1758 - 1765
  • [8] Damping properties of Sn58Bi and Sn3.0Ag0.5Cu solders with different thicknesses and preparation directions
    Li, Wangyun
    Liu, Linyiang
    Li, Xingmin
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2023, 35 (02) : 86 - 94
  • [9] Effect of temperature on shear properties of Sn-3.0Ag-0.5Cu and Sn-58Bi solder joints
    Jeong, Min-Seong
    Lee, Dong-Hwan
    Yoon, Jeong-Won
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 903
  • [10] Effect of Reflow Profile Parameters on Shear Performance of Sn3.0Ag0.5Cu/Cu Solder Joint
    Wang, Xin
    Li, Xunping
    Pan, Kailin
    Zhou, Bin
    Jiang, Tingbiao
    PROCEEDINGS OF 2014 10TH INTERNATIONAL CONFERENCE ON RELIABILITY, MAINTAINABILITY AND SAFETY (ICRMS), VOLS I AND II, 2014, : 691 - 693
12345