Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method

被引:11
|
作者
Taguchi, Y [1 ]
Tanaka, M [1 ]
机构
[1] Niigata Univ, Dept Chem & Chem Engn, Niigata 9502181, Japan
关键词
composites; recycling; waste; functional particles; solid powder;
D O I
10.1002/app.11920
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Composite particles composed of solid powders and polymer were prepared by semichemical recycle of wasted plastics. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. Both magnetite and silicon carbide powders were used as solid powders to give thermal and electric conductivity and magnetization, respectively. In the experiment, the oil-phase dissolving expanded polystyrene was dispersed in fine droplets into the continuous water phase. Two kinds of powders were added at the same time or separately in the O/W dispersion. Composite particles were found to have the structure that polymer particle was covered with two kinds of solid powders. The mean diameter of composite particles and the content of each solid powder were strongly affected by the addition time when silicon carbide powder was added into the dispersion. Furthermore, it was found that the gradient adhesion layer due to two solid powders was able to be formed on the surface of polymer particle. (C) 2003 Wiley Periodicals, Inc.
引用
收藏
页码:483 / 488
页数:6
相关论文
共 50 条
  • [41] Preparation of Ni/C core-shell composite powders by electroless plating method
    Zhang Hai-jun
    Liu Yun
    Jia Quan-li
    Jia Xiao-lin
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S1144 - S1147
  • [42] Preparation of Ni/C core-shell composite powders by electroless plating method
    张海军
    刘云
    贾全利
    贾晓林
    TransactionsofNonferrousMetalsSocietyofChina, 2007, (S1) : 1144 - 1147
  • [43] Preparation of polymer composite upconversion phosphor from inorganic particles
    Sogta, K
    Koizumi, R
    Yamada, M
    Matsuura, D
    Nagasaki, Y
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2005, 18 (01) : 73 - 74
  • [44] Sorption of toluene from aqueous solutions with polyethylene and cellulose powders and composite materials made from them
    M. I. Voronova
    R. Yu. Golovanov
    A. G. Zakharov
    Fibre Chemistry, 2007, 39 : 388 - 391
  • [45] Sorption of toluene from aqueous solutions with polyethylene and cellulose powders and composite materials made from them
    Voronova, M. I.
    Golovanov, R. Yu.
    Zakharov, A. G.
    FIBRE CHEMISTRY, 2007, 39 (05) : 388 - 391
  • [46] Estimation of the probability of collision of heterogeneous particles of composite powders during the formation of coatings by detonation method
    Ganigin, S. Yu.
    Grechukhina, M. S.
    Nechaev, A. S.
    VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI, 2023, 27 (04): : 753 - 764
  • [47] The effects of preparation conditions on mechanically fabricated composite particles for solid oxide fuel cells
    Hobara, Natsuro
    Abe, Hiroya
    Naito, Makio
    Hagiwara, Akifusa
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2011, 119 (1395) : 801 - 807
  • [49] Preparation and evaluation of composite electromagnetic wave absorbers made of aluminum fine particles dispersed in polystyrene medium
    Faculty of Engineering, Doshisha University, 1-3, Tatara Miyakodani, Kyotanabe 610-0321, Japan
    IEEJ Trans. Fundam. Mater., 2008, 4 (242-250+11):
  • [50] Preparation and evaluation of composite electromagnetic wave absorbers made of fine aluminum particles dispersed in polystyrene medium
    Wada, Y.
    Asano, N.
    Sakai, K.
    Yoshikado, S.
    PIERS 2008 CAMBRIDGE, PROCEEDINGS, 2008, : 279 - 285