RHEOLOGICAL PROPERTIES OF BITUMEN MODIFIED WITH A COMBINATION OF FT PARAFFIN WAX (SASOBIT®) AND OTHER ADDITIVES

被引:31
作者
Fazaeli, Hassan [1 ]
Amini, Amir A. [1 ]
Moghadas Nejad, Fereidoon [1 ]
Behbahani, Hamid [1 ]
机构
[1] Iran Univ Sci & Technol, Dept Civil Engn, Tehran, Iran
关键词
modified bitumen; sasobit; dynamic shear rheometer; morphology; additives; POLYPHOSPHORIC ACID; TIRE RUBBER; STORAGE STABILITY; COMMERCIAL WAXES; ASPHALT; COMPATIBILITY; BEHAVIOR; FILLERS;
D O I
10.3846/13923730.2014.897977
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Fischer-Tropsch paraffin Sasobit((R)) is a popular Warm Mix Asphalt (WMA) modifier applied to improve physical and rheological properties of bitumen. Although there are a number of studies investigating the effects of sasobit on bitumen properties, little has been carried out on evaluation of bitumen modified by sasobit along with other additives. In this study, sasobit modified bitumen is used as the base condition and four common modifiers namely anti-stripping agent, Crumb Rubber (CR), Styrene-Butadiene-Styrene (SBS) and Polyphosphoric Acid (PPA) are added separately to the FT - Wax modified bitumen to evaluate the compatibility of these additives with sasobit. Morphological, rheological and physical properties of modified binders are studied using Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), Dynamic Mechanical Analysis (DMA), Bending Beam Rheometer (BBR) alongside with conventional tests. Results show that although anti-stripping agent reduce bitumen viscosity and mixing/compaction temperatures of asphalt mixtures, it has significantly increased the stiffness of sasobit modified bitumen at low temperatures. Among all, sasobit and crumb rubber combination exhibited the best performance, especially at low and intermediate temperatures.
引用
收藏
页码:135 / 145
页数:11
相关论文
共 42 条
  • [1] Styrene butadiene styrene polymer modification of road bitumens
    Airey, GD
    [J]. JOURNAL OF MATERIALS SCIENCE, 2004, 39 (03) : 951 - 959
  • [2] Rheological properties of styrene butadiene styrene polymer modified road bitumens
    Airey, GD
    [J]. FUEL, 2003, 82 (14) : 1709 - 1719
  • [3] American Society for Testing and Materials, 2007, AnnualBook of ASTM Standards, DOI [10.1520/D0092-12B, DOI 10.1520/D0092-12B]
  • [4] Anderson D.A., 1993, Journal of the Association of Asphalt Paving Technologists, V62, P481
  • [5] [Anonymous], 2013, ASTM D5/D5M-13, DOI [10.1520/D0005_D0005M-13, DOI 10.1520/D0005_D0005M-13]
  • [6] [Anonymous], 2012, D4402D4402M12 ASTM I, DOI [10.1520/D4402_D4402M-12, DOI 10.1520/D4402_D4402M-12]
  • [7] [Anonymous], 2012, D93812 ASTM INT, DOI [10.1520/D0938-12, DOI 10.1520/D0938-12]
  • [8] [Anonymous], 2005, THESIS
  • [9] [Anonymous], 2012, D36D36M12 ASTM INT, DOI [10.1520/D0036_D0036M-12, DOI 10.1520/D0036_D0036M-12]
  • [10] [Anonymous], 2007, ASTM D113, DOI [10.1520/d0113-07, DOI 10.1520/D0113-07]