Measurement of interfacial shear strength of carbon fibre/epoxy composites using a single fibre pull-out test

被引：29

作者：

Deng, SQ ^{[1
]}

Ye, L ^{[1
]}

Mai, YW ^{[1
]}

机构：

[1] Univ Sydney, Dept Mech & Mechatron Engn, Ctr Adv Mat Technol, Sydney, NSW 2006, Australia

来源：

ADVANCED COMPOSITE MATERIALS | 1998年 / 7卷 / 02期

基金：

澳大利亚研究理事会;

关键词：

single fibre pull-out test; fibre-matrix interface; fibre-matrix adhesion; carbon fibre/epoxy composites;

D O I：

10.1163/156855198X00129

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Single fiber pull-out tests were conducted for G34-700/Araldite-F, T700S/Araldite-F and T800H/Araldite-F model composites using an improved experimental set-up to evaluate the interfacial shear strength (IFSS). The modified method made it possible to reduce the formation of resin meniscus and to accurately define the embedded fibre length, and it also provided a practical approach to conveniently estimate the IFSS for comparison of the fibre-matrix adhesion between different composite systems or different fibre surface conditions. A strong interfacial adhesion and unstable debonding process without detectable friction stages were found for all types of model composites with fibres being chemically treated/sized or sizing being removed. The electrochemical oxidation treatment and sizing on the carbon fibres noticeably increase the IFSS of the composites.

引用

页码：169 / 182

页数：14

共 50 条

[41] SINGLE-FIBER POLYMER COMPOSITES .1. INTERFACIAL SHEAR-STRENGTH AND STRESS-DISTRIBUTION IN THE PULL-OUT TEST
LI, ZF
GRUBB, DT
JOURNAL OF MATERIALS SCIENCE, 1994, 29 (01) : 189 - 202
[42] Critical discussion of the single-fibre pull-out test: Does it measure adhesion?
Beckert, W
Lauke, B
COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (12) : 1689 - 1706
[43] On failure phenomenon in single-fibre pull-out tests
Nanyang Technological Univ, Singapore, Singapore
J Mater Sci Lett, 6 (528-530):
[44] Effect of transcrystallization in carbon fiber reinforced poly(p-phenylene sulfide) composites on the interfacial shear strength investigated with the single fiber pull-out test
Schulz, E
Kalinka, G
Auersch, W
JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS, 1996, B35 (3-4): : 527 - 546
[45] The dependence of interfacial shear strength on temperature and matrix chemistry in glass fibre epoxy composites
Minty, Ross F.
Yang, Liu
Thomason, James L.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2023, 164
[46] A shear-lag model with a cohesive fibre-matrix interface for analysis of fibre pull-out
Chen, Zuorong
Yan, Wenyi
MECHANICS OF MATERIALS, 2015, 91 : 119 - 135
[47] Interfacial Debonding Force and Shear Strength of Sugar Palm (Arenga Pinnata) Fiber Reinforced Composites by Pull-Out Test
Khor, L. S.
Lemon, Z.
Lee, C. H.
ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5, 2013, 634-638 : 1931 - 1936
[48] A DIRECT COMPARISON OF THE FRAGMENTATION TEST AND THE MICROBOND PULL-OUT TEST FOR DETERMINING THE INTERFACIAL SHEAR-STRENGTH
RAO, V
HERRERAFRANCO, P
OZZELLO, AD
DRZAL, LT
JOURNAL OF ADHESION, 1991, 34 (1-4): : 65 - 77
[49] Evaluation of interfacial properties by embedded single fibre test in aramid/epoxy composites
Kitagawa, K
Hayasaki, S
Hamada, H
Maekawa, Z
Ikuta, N
COMPOSITE INTERFACES, 1999, 6 (02) : 169 - 183
[50] The single-fibre pull-out test .2. Quantitative evaluation of an uncatalysed TGDDM/DDS epoxy cure study
DiFrancia, C
Ward, TC
Claus, RO
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (08) : 613 - 624

← 1 2 3 4 5 →