Measurement of interfacial shear strength of carbon fibre/epoxy composites using a single fibre pull-out test

被引：29

作者：

Deng, SQ ^{[1
]}

Ye, L ^{[1
]}

Mai, YW ^{[1
]}

机构：

[1] Univ Sydney, Dept Mech & Mechatron Engn, Ctr Adv Mat Technol, Sydney, NSW 2006, Australia

来源：

ADVANCED COMPOSITE MATERIALS | 1998年 / 7卷 / 02期

基金：

澳大利亚研究理事会;

关键词：

single fibre pull-out test; fibre-matrix interface; fibre-matrix adhesion; carbon fibre/epoxy composites;

D O I：

10.1163/156855198X00129

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Single fiber pull-out tests were conducted for G34-700/Araldite-F, T700S/Araldite-F and T800H/Araldite-F model composites using an improved experimental set-up to evaluate the interfacial shear strength (IFSS). The modified method made it possible to reduce the formation of resin meniscus and to accurately define the embedded fibre length, and it also provided a practical approach to conveniently estimate the IFSS for comparison of the fibre-matrix adhesion between different composite systems or different fibre surface conditions. A strong interfacial adhesion and unstable debonding process without detectable friction stages were found for all types of model composites with fibres being chemically treated/sized or sizing being removed. The electrochemical oxidation treatment and sizing on the carbon fibres noticeably increase the IFSS of the composites.

引用

页码：169 / 182

页数：14

共 50 条

[31] The single-fibre pull-out test .1. Review and interpretation
DiFrancia, C
Ward, TC
Claus, RO
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (08) : 597 - 612
[32] An improved analysis for axisymmetric stress distributions in the single fibre pull-out test
Quek, MY
Yue, CY
JOURNAL OF MATERIALS SCIENCE, 1997, 32 (20) : 5457 - 5465
[33] Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods
Yang, L.
Thomason, J. L.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (09) : 1077 - 1083
[34] Temperature dependence of the interfacial shear strength in glass-fibre epoxy composites
Thomason, J. L.
Yang, L.
COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 96 : 7 - 12
[35] Critical fibre length and apparent interfacial shear strength of single flax fibre polypropylene composites
van den Oever, MJA
Bos, HL
ADVANCED COMPOSITES LETTERS, 1998, 7 (03) : 81 - 85
[36] Effect of sizing agent on interfacial shear strength of carbon fibre composites
Guo, C. C.
Zhao, Y.
Chen, D.
Zhan, M. S.
MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 997 - 1002
[37] A comparative investigation of interfacial adhesion behaviour of polyamide based self-reinforced polymer composites by single fibre and multiple fibre pull-out tests
Chandran, M. Sharan
Padmanabhan, K.
Raj, D. K. Dipin
Chebiyyam, Yashasvi
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020, 34 (05) : 511 - 530
[38] COMPOSITE CARBON FIBRE EMBEDMENT DEPTH AND ANGLE CONFIGURATION INFLUENCE ON SINGLE FIBRE PULL-OUT FROM CONCRETE
Lukasenoks, Arturs
Macanovskis, Arturs
Krasnikovs, Andrejs
17TH INTERNATIONAL SCIENTIFIC CONFERENCE: ENGINEERING FOR RURAL DEVELOPMENT, 2018, : 1507 - 1512
[39] Interfacial Shear Strength Evaluation using Fiber Bundle Pull-Out Method
Kobayashi, Satoshi
Yamamoto, Tatsuro
Nakai, Asami
DESIGN, MANUFACTURI NG AND APPLICATIONS OF COMPOSITES, 2008, : 215 - 222
[40] On failure phenomenon in single-fibre pull-out tests
Yue, CY
Quek, MY
JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (06) : 528 - 530

← 1 2 3 4 5 →