Characterization of Contact Force During Endocardial and Epicardial Ventricular Mapping

Background-The optimal contact force (CF) for ventricular mapping and ablation remains unvalidated. We assessed CF in different endocardial and epicardial regions during ventricular tachycardia substrate mapping using a CF-sensing catheter (Smartouch; Biosense-Webster) and compared the transseptal versus retroaortic approach. Methods and Results-In total, 8979 mapping points with CF, and force vector orientation (VO) were recorded in 21 patients, comprising 13 epicardial, 12 left ventricular (6 transseptal and 6 retroaortic approach), and 12 right ventricular endocardial maps. VO was defined as adequate when the vector was directed toward the myocardium. During epicardial mapping, 46% of the points showed an adequate VO and a median CF of 8 (4-13) g, however, with significant differences among the 8 regions. When VO was inadequate, median CF was higher at 16 (10-24) g (P<0.0001). During left ventricular and right ventricular endocardial mapping, 94% of VO were adequate. Median CF of adequate VO was higher in the left ventricular and right ventricular endocardium than in the epicardium (15 [8-25] and 13 [7-22] g versus 8 [4-13] g, respectively; both P<0.001). Global median left ventricular CF with transseptal approach was not statistically different from retroaortic approach, but CF in the apicoinferior and apicoseptal regions was higher with transseptal approach (P< 0.001). Conclusions-Ventricular mapping demonstrates important regional variations in CF, but in general, CF is higher endocardially than epicardially where poor catheter orientation is associated with higher CF. A transseptal approach may lead to improved contact particularly in the apicoseptal and inferior regions.