Internal stresses and textures of nanostructured alumina scales growing on polycrystalline Fe3Al alloy

The evolution of internal stresses in oxide scales growing on polycrystalline Fe3Al alloy in atmospheric air at 700 degrees C was determined using in situ energy-dispersive synchrotron X-ray diffraction. Ex situ texture analyses were performed after 5 h of oxidation at 700 degrees C. Under these conditions, the oxide-scale thickness, as determined by X-ray photoelectron spectroscopy, lies between 80 and 100 nm. The main phase present in the oxide scales is alpha-Al2O3, with minor quantities of metastable theta-Al2O3 detected in the first minutes of oxidation, as well as alpha-Fe2O3. alpha-Al2O3 grows with a weak (0001) fiber texture in the normal direction. During the initial stages of oxidation the scale develops, increasing levels of compressive stresses which later evolve to a steady state condition situated around -300 MPa. (C) 2010 International Centre for Diffraction Data. [DOI: 10.1154/1.3402764]