A new type of vibration isolator based on magnetorheological elastomer

被引:86
作者
Bastola, Anil K. [1 ,2 ]
Li, Lin [1 ]
机构
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, 50 Nanyang Ave, Singapore 639798, Singapore
[2] Nanyang Technol Univ, Inst Sports Res, 50 Nanyang Ave, Singapore 639798, Singapore
关键词
MR elastomer; Isolator; Preload; Magnetic field; FUZZY CONTROL;
D O I
10.1016/j.matdes.2018.08.009
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this work, a new type of adaptive vibration isolator based on magnetorheological (MR) elastomer (MRE) is presented. A new method was adopted to develop such an isolator where both a magnetic field and a preload were applied simultaneously. The magnetic attraction force was utilized to change the preload in the single degree of freedom (DOF) system. The system has such a provision that when a magnetic field is applied the preload would be automatically acting to the MR elastomer. In such a combined loading condition, the natural frequency of a single DOF system promptly shifted to a higher frequency and the stiffness of the MR elastomer was significantly increased. The stiffness of the MR elastomer system was found to be increased as high as 730 times of its original stiffness when the magnetic field of 520 mT was applied, which is a significantly higher augmentation than those reported in the literature. The combined effect of the preload and the magnetic field was profound because the magnetic interaction among the magnetic particles was simultaneously boosted by both the magnetic field and the preloading effect. It is often a large difficulty to generate a higher magnetic field in most of the MRE-based isolators. Our study showed that when a suitable preload and a suitable magnetic field are applied together, a highly tunable isolator system can be developed even with the application of a relatively lower magnetic field strength. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:431 / 436
页数:6
相关论文
共 29 条
[1]   Development of hybrid magnetorheological elastomers by 3D printing [J].
Bastola, A. K. ;
Paudel, M. ;
Li, L. .
POLYMER, 2018, 149 :213-228
[2]   A novel hybrid magnetorheological elastomer developed by 3D printing [J].
Bastola, A. K. ;
Hoang, V. T. ;
Li, L. .
MATERIALS & DESIGN, 2017, 114 :391-397
[3]  
Behrooz M., 2014, SMART MATER STRUCT, V23
[4]   Lyapunov-based Semi-active Control of Adaptive Base Isolation System employing Magnetorheological Elastomer base isolators [J].
Chen, Xi ;
Li, Jianchun ;
Li, Yancheng ;
Gu, Xiaoyu .
EARTHQUAKES AND STRUCTURES, 2016, 11 (06) :1077-1099
[5]   Model of magnetorheological elastomers [J].
Davis, LC .
JOURNAL OF APPLIED PHYSICS, 1999, 85 (06) :3348-3351
[6]   Development of an adaptive tuned vibration absorber with magnetorheological elastomer [J].
Deng, Hua-xia ;
Gong, Xing-long ;
Wang, Lian-hua .
SMART MATERIALS & STRUCTURES, 2006, 15 (05) :N111-N116
[7]   Model-free fuzzy control of a magnetorheological elastomer vibration isolation system: analysis and experimental evaluation [J].
Fu, Jie ;
Li, Peidong ;
Wang, Yuan ;
Liao, Guanyao ;
Yu, Miao .
SMART MATERIALS AND STRUCTURES, 2016, 25 (03)
[8]   Full-field deformation of magnetorheological elastomer under uniform magnetic field [J].
Gong, Xinglong ;
Liao, Guojiang ;
Xuan, Shouhu .
APPLIED PHYSICS LETTERS, 2012, 100 (21)
[9]   GA-fuzzy control of smart base isolated benchmark building using supervisory control technique [J].
Kim, Hyun-Su ;
Roschke, Paul N. .
ADVANCES IN ENGINEERING SOFTWARE, 2007, 38 (07) :453-465
[10]   Iron particle and anisotropic effects on mechanical properties of magneto-sensitive elastomers [J].
Kumar, Vineet ;
Lee, Dong-Joo .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2017, 441 :105-112