Microstructure and tensile properties of Sn-9Zn-xAg lead-free solder alloys

被引：84
|
作者：
Song, JM [1 ]
Lan, GF [1 ]
Lui, TS [1 ]
Chen, LH [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 701, Taiwan
来源：
SCRIPTA MATERIALIA | 2003年 / 48卷 / 08期
关键词：
Sn-Zn-Ag; microstructure; mechanical properties;
D O I：
10.1016/S1359-6462(02)00647-4
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Microstructural features and tensile properties of Sn-Zn eutectic alloys with varying Ag content were examined in this study. Results indicate that the main effects of Ag addition were reduced strength and greater ductility due to the differences in the morphology and distribution of second phase particles. Also, a modified structure caused by rapid solidification resulted in better tensile properties. (C) 2003 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1047 / 1051
页数：5
相关论文
共 50 条
  • [41] Effect of a trace of Bi and Ni on the microstructure and wetting properties of Sn-Zn-Cu lead-free solder
    Ma, Haitao
    Xie, Haiping
    Wang, Lai
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2007, 23 (01) : 81 - 84
  • [42] Reinforcement of graphene nanosheets on the microstructure and properties of Sn58Bi lead-free solder
    Ma, Yong
    Li, Xuezheng
    Zhou, Wei
    Yang, Lizhuang
    Wu, Ping
    MATERIALS & DESIGN, 2017, 113 : 264 - 272
  • [43] Reinforcement of vanadium on the microstructure and properties of Sn-58Bi lead-free solder joints
    Yang, Li
    Zhou, Shiyuan
    Zhang, Yaocheng
    Zhu, Lu
    Xiong, Yifeng
    Jiang, Wei
    Shen, Sai
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
  • [44] Investigation of microstructures and tensile properties of a Sn-Cu lead-free solder alloy
    Fulong Zhu
    Honghai Zhang
    Rongfeng Guan
    Sheng Liu
    Journal of Materials Science: Materials in Electronics, 2006, 17 : 379 - 384
  • [45] The effects of Cu and Al on dry sliding wear properties of eutectic Sn-9Zn lead-free solder alloy
    Ozyurek, D.
    Yavuzer, B.
    Tuncay, T.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2016, 30 (15) : 1662 - 1670
  • [46] The Influence of Nickel Addition on Properties of Sn-4.0Zn-0.7Cu Lead-Free Solder
    Sukhontapatipak, Panisara
    Sungkhaphaitoon, Phairote
    PHYSICS OF METALS AND METALLOGRAPHY, 2023, 124 (13): : 1597 - 1605
  • [47] Properties of Two Lead-free Solder Alloys and Comparison with Sn37Pb
    Xu, Tianhan
    Zhao, Maiqun
    Wang, Danghui
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 540 - +
  • [48] Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn-Sb lead-free solder alloys
    Dias, Marcelino
    Costa, Thiago
    Rocha, Otavio
    Spinelli, Jose E.
    Cheung, Noe
    Garcia, Amauri
    MATERIALS CHARACTERIZATION, 2015, 106 : 52 - 61
  • [49] The microstructure, melting properties and wettability of Sn-3.5Ag-0.7Cu-xIn lead-free solder alloys
    Chen, Xingguang
    Ma, Xue
    Deng, Yuan
    Gao, Pengfei
    Li, Liangfeng
    PHILOSOPHICAL MAGAZINE, 2022, 102 (04) : 321 - 339
  • [50] Study on melt properties, microstructure, tensile properties of low Ag content Sn-Ag-Zn Lead-free solders
    Luo, Tingbi
    Chen, Zhuo
    Hu, Anmin
    Li, Ming
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 : 885 - 890
12345