Effect of glass fiber and crystallinity on light transmission during laser transmission welding of thermoplastics

被引：29

作者：

Xu, Xin Feng ^{[1
]}

Bates, Philip J. ^{[1
]}

Zak, Gene ^{[2
]}

机构：

[1] Royal Mil Coll Canada, Dept Chem & Chem Engn, Kingston, ON K7K 7B4, Canada

[2] Queens Univ, Dept Mech & Mat Engn, Kingston, ON K7L 3N6, Canada

来源：

OPTICS AND LASER TECHNOLOGY | 2015年 / 69卷

基金：

加拿大自然科学与工程研究理事会;

关键词：

Laser transmission welding; Thermoplastics; Absorption coefficient; OPTICAL CHARACTERIZATION;

D O I：

10.1016/j.optlastec.2014.12.025

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

In order to predict and optimize the contour laser transmission welding (LTW) process, it is important to understand how the laser energy behaves during transmission through the transparent part. In this study, transmission measurements were made on unreinforced and glass-fiber-reinforced amorphous and semi-crystalline thermoplastics at different thicknesses. Using the ratio of transmitted power to laser power, apparent absorption coefficients and apparent reflections were calculated. The results indicate that there is a linear relationship between the glass fiber volume fraction and the apparent absorption coefficient of reinforced polymers; similar effects were also observed for crystallinity. A simple model was developed to estimate apparent absorption coefficient of reinforced polymers as a function of composition. The apparent reflection increased with crystallinity due to increased back scattering. However, for glass-fiber-reinforced polymers, the apparent reflection displayed a more complex behavior. Crown Copyright (C) 2014 Published by Elsevier Ltd. All rights reserved.

引用

页码：133 / 139

页数：7

共 50 条

[21] Simulation-based investigation on the temperature influence in laser transmission welding of thermoplastics
Lakemeyer, Patrick
Schoeppner, Volker
WELDING IN THE WORLD, 2019, 63 (02) : 221 - 228
[22] Simulation-based investigation on the temperature influence in laser transmission welding of thermoplastics
Patrick Lakemeyer
Volker Schöppner
Welding in the World, 2019, 63 : 221 - 228
[23] Modeling of the heating process during the laser transmission welding of thermoplastics and calculation of the resulting stress distribution
Suveni Kreimeier Sooriyapiragasam
Christian Hopmann
Welding in the World, 2016, 60 : 777 - 791
[24] Modeling of the heating process during the laser transmission welding of thermoplastics and calculation of the resulting stress distribution
Sooriyapiragasam, Suveni Kreimeier
Hopmann, Christian
WELDING IN THE WORLD, 2016, 60 (04) : 777 - 791
[25] Weld line transverse energy density distribution measurement in laser transmission welding of thermoplastics
Zak, G.
Mayboudi, L.
Chen, M.
Bates, P. J.
Birk, M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (01) : 24 - 31
[26] Experimental investigation of laser transmission welding of thermoplastics with part-adapted temperature fields
Devrient, M.
Kern, M.
Jaeschke, P.
Stute, U.
Haferkamp, H.
Schmidt, M.
LASERS IN MANUFACTURING (LIM 2013), 2013, 41 : 59 - 69
[27] Irradiation Strategy for Laser Transmission Welding of Thermoplastics Using High Brilliance Laser Source
Aden, M.
Otto, G.
Duwe, C.
INTERNATIONAL POLYMER PROCESSING, 2013, 28 (03) : 300 - 305
[28] An approach to model the melt displacement and temperature profiles during the laser through-transmission welding of thermoplastics
Potente, H.
Fiegler, G.
Haferkamp, H.
Fargas, M.
von Busse, A.
Bunte, J.
POLYMER ENGINEERING AND SCIENCE, 2006, 46 (11) : 1565 - 1575
[29] Modeling of laser heat source considering light scattering during laser transmission welding
Liu, Huixia
Liu, Wei
Zhong, Xuejiao
Liu, Baoguang
Guo, Dehui
Wang, Xiao
MATERIALS & DESIGN, 2016, 99 : 83 - 92
[30] A 3-D thermal model for spot laser transmission welding of thermoplastics
Mayboudi L.S.
Birk A.M.
Zak G.
Bates P.J.
Weld. World, 2007, 1-2 (74-78): : 74 - 78

← 1 2 3 4 5 →