Electrochemical and surface characterisation of gold nanoparticle decorated multi-walled carbon nanotubes

A novel type of gold nanoparticle/multi-walled carbon nanotube (AuNP/MWCNT) composite electrodes is presented. The electrochemical reduction of oxygen on these hybrid electrodes was studied using the rotating disk electrode (RDE) method. The AuNP/MWCNT nanocomposites were prepared by sputter deposition of gold in argon atmosphere on MWCNTs followed by heat-treatment of the catalyst at different temperatures. High-resolution scanning electron microscopy (HR-SEM), glancing incidence angle X-ray powder diffraction (GIXRD) and small-angle X-ray scattering (SAXS) techniques were employed to characterise the surface structure and morphology of catalyst materials. Au nanoparticles with diameter around 20 nm were dispersed at the tips and on the sidewalls of nanotubes. Electrochemical measurements were performed to demonstrate the electrocatalytic properties of the composite catalysts towards O-2 reduction in acid media. The successful preparation of AuNP/MWCNT nanocomposites by magnetron sputtering opens up the possibility of making an efficient dispersion of nanoparticles for electrocatalyst design. (C) 2009 Elsevier B.V. All rights reserved.