Influence of non-metallic inclusions on the fatigue properties of heavily cold drawn steel wires.

被引：30

作者：

Lambrighs, Kasper ^{[1
]}

Verpoest, Ignaas ^{[1
]}

Verlinden, Bert ^{[1
]}

Wevers, Martine ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Heverlee, Belgium

来源：

FATIGUE 2010 | 2010年 / 2卷 / 01期

关键词：

Steel Wire; Fatigue Crack Initiation; Fatigue Thresholds; Internal Crack; Non-metallic Inclusions; Fractography; Stress Intensity Factor; HIGH-CYCLE FATIGUE; SUBSURFACE CRACK INITIATION; HIGH-STRENGTH STEELS; BEARING STEEL; MECHANISM; BEHAVIOR; FRACTURE; FAILURE; STRESS; SIZE;

D O I：

10.1016/j.proeng.2010.03.019

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The influence of non-metallic inclusions on the fatigue properties of heavily cold drawn steel wires is studied. Through a fractography study it is possible to link the inclusion properties, such as chemical composition, geometry, size and location, to the fatigue properties. Comparing the Stress Intensity Factors (SIF) of non-metallic inclusions to the threshold value for long crack growth shows that the defect size that should be used to calculate the SIF is larger than the inclusion size itself. This is validated using Scanning Electron Microscopy (SEM) in combination with a Focused Ion Beam (FIB). This SEM/FIB study shows that the region around non-metallic inclusions is characterized by alterations in the microstructure that should be taken into account. It is calculated that the SIF increases with 16.5 +/- 3.6 % compared to Murakami's way of calculating SIF of non-metallic inclusions. (C) 2010 Published by Elsevier Ltd.

引用

页码：173 / 181

页数：9

共 24 条

[1] Notch effect on fatigue strength reduction of bearing steel in the very high cycle regime [J].

Akiniwa, Yoshiaki ;

Miyamoto, Nobuyuki ;

Tsuru, Hirotaka ;

Tanaka, Keisuke .

INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (11) :1555-1565

[2]

[Anonymous], 1992, MODERN CERAMIC ENG P

[3]

[Anonymous], 1998, An Introduction to Mechanical Properties of Ceramics, DOI DOI 10.1017/CBO9780511623103

[4] The stress state around two spatially arranged ellipsoidal inclusions - A case study for high-speed tool steel [J].

Antretter, T ;

Fischer, FD .

COMPUTATIONAL MATERIALS SCIENCE, 1996, 7 (1-2) :247-252

[5] Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure [J].

Chapetti, MD ;

Tagawa, T ;

Miyata, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2) :227-235

[6] Prediction of very high cycle fatigue failure for high strength steels, based on the inclusion geometrical properties [J].

Dominguez Almaraz, Gonzalo M. .

MECHANICS OF MATERIALS, 2008, 40 (08) :636-640

[7]

LAMBRIGHS K, ENG FAIL ANAL UNPUB

[8] Reliability evaluation on very high cycle fatigue property of GCr15 bearing steel [J].

Li, W. ;

Sakai, T. ;

Li, Q. ;

Lu, L. T. ;

Wang, P. .

INTERNATIONAL JOURNAL OF FATIGUE, 2010, 32 (07) :1096-1107

[9]

Munz D., 1999, Ceramics: Mechanical Properties, Failure Behaviour, Materials Selection

[10] Factors influencing the mechanism of superlong fatigue failure in steels [J].

Murakami, Y ;

Nomoto, T ;

Ueda, T .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1999, 22 (07) :581-590

← 1 2 3 →