Thin film flexible electrodes based on gold/polytetrafluoroethylene layers

被引：0

作者：

McLaughlin, JA ^{[1
]}

Hyland, M ^{[1
]}

McAdams, ET ^{[1
]}

Holder, D ^{[1
]}

Zhou, DM ^{[1
]}

机构：

[1] Univ Ulster, No Ireland Bioengn Ctr, Newtownabbey BT37 0QB, Antrim, North Ireland

来源：

PROCEEDINGS OF THE 18TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 18, PTS 1-5 | 1997年 / 18卷

关键词：

D O I：

暂无

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

Thin film gold electrodes on flexible Poltetrafluoroethylene (PTFE) substrates are produced for medical implantation, The electrical interface impedance of the electrodes is measured in vitro as a function of surface roughness of the gold as quantified using atomic force microscopy. Alternating current (A.C) impedance measurements show a linear relationship between tile reactive component of the impedance and the surface roughness, Surface features below 42 nm root mean square deviation from the average surface height are shown to result in it reduction in interface impedance and improved impedance matching to a 1% NaCl solution. The surface roughness of the gold is controlled using an electrolytic etch in a NaCl solution allowing the electrical characteristics of the interface to be influenced, Plasma modification of the PTFE substrate is seen to increase the surface energy by changing the chemical nature of tile polymer and lead to enhanced adhesion of the gold layers, Applications of such techniques are expected to improve the current design of physiolgcal signal sensors as well as enhance the reproduabilty of biosensing devices.

引用

页码：108 / 109

页数：2