Results of an interlaboratory study of the ASTM standard test method for tensile properties of polymer matrix composites D 3039

被引：0
|
作者：
Pinnell, M
Fields, R
Zabora, R
机构：
[1] Univ Dayton, Dept Mech & Aerosp Engn, Dayton, OH 45469 USA
[2] Lockheed Martin Missiles & Fire Control, Orlando, FL 32835 USA
来源：
JOURNAL OF TESTING AND EVALUATION | 2005年 / 33卷 / 01期
关键词：
polymer matrix composites; tensile testing; modulus; strength; failure strain; precision statistics; repeatability; reproducibility; interlaboratory testing;
D O I：
10.1520/jte12521
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An investigation was conducted on the ASTM Standard Test Method for Tensile Properties of Polymer Matrix Composites (D 3039). This investigation consisted of both preliminary testing and an interlaboratory test program. Information generated from preliminary testing was used to determine the effects of various parameters and to optimize the interlaboratory test plan and test protocol. The interlaboratory study portion of this investigation was conducted on six composite material systems in a variety of lay-up configurations. The number of participating lab ranged from five to nine depending on the material type. Precision statistics were determined for the ASTM D 3039 standard from the data generated by the interlaboratory testing in accordance with the ASTM Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method (E 691).
引用
收藏
页码：27 / 31
页数：5
相关论文
共 50 条
  • [21] Interlaboratory study of the standard test method for evaluating bond of seven-wire steel prestressing strand
    Polydorou, Thomaida
    Riding, Kyle A.
    Peterman, Robert J.
    PCI JOURNAL, 2016, : 53 - 64
  • [22] In Situ Aerobic Biodegradation In Soil Contact Using The Standard Test Method of ASTM D 5988-12
    Al-Salem, S. M.
    Al-Nasser, A.
    Sultan, H.
    Karam, H.
    2019 3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL SCIENCE, 2019, 291
  • [23] Effect of Different Standard Geometry Shapes on the Tensile Properties of 3D-Printed Polymer
    Faidallah, Rawabe Fatima
    Hanon, Muammel M.
    Vashist, Varun
    Habib, Ahmad
    Szakal, Zoltan
    Oldal, Istvan
    POLYMERS, 2023, 15 (14)
  • [24] STUDY OF DAMPING PROPERTIES OF POLYMER MATRIX COMPOSITES THROUGH WAVE PROPAGATION
    Kulkarni, Shank S.
    Tabarraei, Alireza
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 1, 2018,
  • [25] Interlaboratory round robin study on axial tensile properties of SiC-SiC CMC tubular test specimens
    Singh, Gyanender
    Gonczy, Steve
    Deck, Christian
    Lara-Curzio, Edgar
    Katoh, Yutai
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2018, 15 (06) : 1334 - 1349
  • [26] Tensile and Flexural properties of Jute, Pineapple leaf and Glass Fiber Reinforced Polymer Matrix Hybrid Composites
    Reddy, M. Indra
    Kumar, M. Anil
    Raju, Ch. Rama Bhadri
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (01) : 458 - 462
  • [27] Tensile properties of carbon fiber reinforced polymer matrix composites: Application for the strengthening of reinforced concrete structure
    Kormanikova, E.
    Zmindak, M.
    Novak, P.
    Sabol, P.
    COMPOSITE STRUCTURES, 2021, 275
  • [28] Simpler test method for measuring the interfacial strength of fiber tows in polymer and ceramic matrix composites
    Dharani, L.R.
    Blum, Frank D.
    Materials Technology, 1995, 10 (1-2): : 8 - 10
  • [29] Influence of silica gel humidity on the determination of hydrocarbon types in gasoline by the ASTM D 1319 standard test method in relation to proficiency test reproducibility
    Verplaetse, H.
    Lacourt, M.
    ACCREDITATION AND QUALITY ASSURANCE, 2006, 11 (10) : 521 - 522
  • [30] Influence of silica gel humidity on the determination of hydrocarbon types in gasoline by the ASTM D 1319 standard test method in relation to proficiency test reproducibility
    H. Verplaetse
    M. Lacourt
    Accreditation and Quality Assurance, 2006, 11 : 521 - 522
12345