FE Analyzing of Layout Types for Multi-hole Extrusion Dies

被引：2

作者：

Bingol, S. ^{[1
]}

Keskin, M. S. ^{[1
]}

Ayer, O.

Sarikaya, K. ^{[1
]}

Burucu, O. ^{[1
]}

Alipur, P. ^{[1
]}

机构：

[1] Dicle Univ, Fac Engn, Diyarbakir, Turkey

来源：

MODERN METHODS OF CONSTRUCTION DESIGN | 2014年

关键词：

Extrusion; Multi-hole die; Finite element analysis; Aluminum; SIMULATION;

D O I：

10.1007/978-3-319-05203-8_1

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Extrusion method is an important bulk-forming process to transform materials into semi-finished products in the form of bar, strip, and solid section as well as tubes and hollow sections. One of the basic considerations of die design is to determine the number of die openings based on the shape and size of the profile. In this study, variation of the extrusion load and temperature is investigated for different number and layout of die openings by finite element analysis. Three types of layouts, radial layout of a multi-hole die, flat layout of a multi-hole die and orientation of a shape around its center of gravity, were simulated with four openings in the dies. Moreover, the most commonly used type of them was also simulated for different number of openings in the die to compare the effect of the openings number on the extrusion.

引用

页码：3 / 9

页数：7

共 7 条

[1] FEM simulation of aluminium extrusion through two-hole multi-step pocket dies [J].