The measurement of creep rate sensitivity of copper at room temperature by using nanoindentation

被引:7
作者
Zhang, JM [1 ]
Xu, KW
机构
[1] Shaanxi Normal Univ, Coll Phys & Informat Technol, Xian 710062, Peoples R China
[2] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
关键词
nanoindentation; copper; creep; creep rate sensitivity;
D O I
10.7498/aps.53.2434
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
A new nanoindentation creep test, i.e. a steady-state loading segment followed by the constant load for long period of time, has been proposed by combining a constant loading rate divided by the load (const. PIP) with a constant load test (const. P). The method is applicable not only to the materials with lower melting temperature and higher creep ability, but also to those materials with higher melting temperature and lower creep ability and an indentation size effect. The strain rate sensitivity m of Cu at room temperature determined by the method is about 0.01. It is also found that the previous loading schemes, including the values of the PIP used during loading segment and the maximum depths h(max) at the end of the loading segment, have no obvious influence on the values of the strain rate sensitivity m.
引用
收藏
页码:2439 / 2443
页数:5
相关论文
共 11 条
[1]  
HANNULA SP, 1985, P MATERIALS RES SOC, V40, P217
[2]   Indentation power-law creep of high-purity indium [J].
Lucas, BN ;
Oliver, WC .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (03) :601-610
[3]   MECHANICAL-PROPERTIES OF NANOPHASE TIO2 AS DETERMINED BY NANOINDENTATION [J].
MAYO, MJ ;
SIEGEL, RW ;
NARAYANASAMY, A ;
NIX, WD .
JOURNAL OF MATERIALS RESEARCH, 1990, 5 (05) :1073-1082
[4]   A MICRO-INDENTATION STUDY OF SUPERPLASTICITY IN PB, SN, AND SN-38 WT-PERCENT-PB [J].
MAYO, MJ ;
NIX, WD .
ACTA METALLURGICA, 1988, 36 (08) :2183-2192
[5]   NANOINDENTATION OF NANOCRYSTALLINE ZNO [J].
MAYO, MJ ;
SIEGEL, RW ;
LIAO, YX ;
NIX, WD .
JOURNAL OF MATERIALS RESEARCH, 1992, 7 (04) :973-979
[6]   Multilevel interconnections for ULSI and GSI era [J].
Murarka, SP .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 1997, 19 (3-4) :87-151
[7]   MECHANICAL-PROPERTIES OF THIN-FILMS [J].
NIX, WD .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (11) :2217-2245
[8]   AN IMPROVED TECHNIQUE FOR DETERMINING HARDNESS AND ELASTIC-MODULUS USING LOAD AND DISPLACEMENT SENSING INDENTATION EXPERIMENTS [J].
OLIVER, WC ;
PHARR, GM .
JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) :1564-1583
[9]   AN INVESTIGATION OF THE CREEP PROCESSES IN TIN AND ALUMINUM USING A DEPTH-SENSING INDENTATION TECHNIQUE [J].
RAMAN, V ;
BERRICHE, R .
JOURNAL OF MATERIALS RESEARCH, 1992, 7 (03) :627-638
[10]   Calculation of surface energy of Cu crystal with modified embedded-atom method [J].
Zhang, JM ;
Xu, KW ;
Ma, F .
ACTA PHYSICA SINICA, 2003, 52 (08) :1993-1999