Biomass ash pyrolyzed from municipal sludge and its adsorption performance toward tetracycline: effect of pyrolysis temperature and KOH activation

Large amount of municipal sludge is difficult to handle; its resource utilization is an effective measure. In this study, the municipal sludge from sewage treatment plant was pyrolyzed without gas protection at different temperatures and potassium hydroxide (KOH) concentrations for activation. The pyrolysis products, named biomass ash, with higher surface area and enriched pore structures could be obtained at the pyrolysis temperature of 773 K. Moreover, the KOH activation for raw municipal sludge could further increase the surface area of the pyrolysis biomass ash. The maximum specific surface area was 44.71 m(2)/g, which was obtained under 2 mol/L KOH activation before pyrolysis at 773 K. And in this situation, the obtained pyrolysis biomass ash as adsorbent showed the maximum adsorption capacity of 50.75 mg/g toward tetracycline (TC). Moreover, the TC adsorption onto pyrolysis biomass ash obtained under various conditions followed the pseudo-second-order kinetic model. Adsorption thermodynamics analysis suggested the TC adsorption onto the pyrolysis biomass ash with no pre-activation was mainly due to the multi-molecule heterogeneous adsorption, while the TC adsorption onto pyrolysis biomass ash pretreated through the activation of KOH followed the monomer adsorption mechanism. This different adsorption mechanism was largely related to the pore structure, polarity, and aromaticity of the adsorbent.