Preparation and Application of Sol-Gel Polishing Pad for Polishing CVD Single Crystal Diamond at High Speed

被引:2
|
作者
Lu, Jing [1 ,2 ]
Deng, Ao [1 ,2 ]
Xiao, Ping [1 ,2 ]
机构
[1] Huaqiao Univ, Inst Mfg Engn, Xiamen 361021, Fujian, Peoples R China
[2] Huaqiao Univ, MOE Engn Res Ctr Brittle Mat Machining, Xiamen 361021, Fujian, Peoples R China
基金
中国国家自然科学基金;
关键词
Substrates; Surface roughness; Rough surfaces; Surface treatment; Surface morphology; Abrasives; Diamond; CVD single crystal diamond; sol-gel polishing pad; polishing; DAMAGE; FILMS;
D O I
10.1109/TSM.2022.3146172
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new polishing pad based on the sol-gel (SG) technique is fabricated and can polish the single crystal diamond (SCD) substrate at high speed. In this work, the base material, fillers, and coating height of the polishing pad are selected. Pressed polymer fiber is used as the base material, talcum powder is chosen as filler, and the coating height of the gel formulation system on the surface of the base material is between 20 and 40 mu m. The surface morphology of SCD substrate was observed with a 3D optical surface profiler. The surface roughness decreased from 78.024 nm to 6.126 nm in 2 h and the material removal rate of the SCD (100) was about 135 nm/h. The Raman spectroscopy result shows that there was phase transformation on the surface of the SCD substrate after polishing. The material removal mechanism was proposed based on the result. During the scratch of the diamond abrasive, the diamond on the surface of the SCD substrate was transformed into amorphous carbon. Then the amorphous carbon was removed mechanically. The new gel polishing pad can polish the SCD substrate with high efficiency.
引用
收藏
页码:318 / 323
页数:6
相关论文
共 50 条
  • [31] A novel slurry for chemical mechanical polishing of single crystal diamond
    Liao, Longxing
    Zhang, Zhenyu
    Meng, Fanning
    Liu, Dongdong
    Wu, Bin
    Li, Yubiao
    Xie, Wenxiang
    APPLIED SURFACE SCIENCE, 2021, 564
  • [32] Mechanical polishing single crystal diamond reinforced by metal powder
    Liu, Hao
    Li, Jia-Jun
    Li, Zhen-Rui
    Xu, Kai
    Chen, Zheng-Jia
    Sun, Zhan-Feng
    Chen, Guang-Chao
    Surface Technology, 2019, 48 (09): : 321 - 326
  • [33] Polishing Silicon Wafers with the Nanodiamond Abrasive Tools Prepared by Sol-Gel Technique
    Hu, Guangqiu
    Lu, Jing
    Xu, Xipeng
    PRECISION MACHINING VI, 2012, 496 : 1 - 6
  • [34] Preparation of ZnO crystal by sol-gel method
    陈建勋
    黄伯云
    赵瑞荣
    Transactions of Nonferrous Metals Society of China, 2001, (01) : 154 - 156
  • [35] The polishing properties of magnetorheological-elastomer polishing pad based on the heterogeneous Fenton reaction of single-crystal SiC
    Hu, Da
    Lu, Jiabin
    Deng, Jiayun
    Yan, Qiusheng
    Long, Haotian
    Luo, Yingrong
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2023, 79 : 78 - 85
  • [36] Preparation of ZnO crystal by sol-gel method
    Chen, JX
    Huang, BY
    Zhao, RR
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2001, 11 (01) : 154 - 156
  • [37] Sub-nanoscale polishing of single crystal diamond(100) and the chemical behavior of nanoparticles during the polishing process
    Yuan, Song
    Guo, Xiaoguang
    Huang, Junxin
    Lu, Menggang
    Jin, Zhuji
    Kang, Renke
    Guo, Dongming
    DIAMOND AND RELATED MATERIALS, 2019, 100
  • [38] Single crystal diamond polishing assisted by inductively coupled plasma etching
    Yu, Jiarong
    Liu, Xinyue
    Xu, Rongbin
    Yu, Daquan
    DIAMOND AND RELATED MATERIALS, 2025, 152
  • [39] Preparation of new high-hardness silica sol and its application in chemical mechanical polishing
    Sun Y.-Q.
    Li W.-W.
    Zhao Z.-L.
    Qian J.
    Surface Technology, 2021, 50 (11): : 383 - 389
  • [40] Study on the mechanism of chemical mechanical polishing on high-quality surface of single crystal diamond
    Liao, Longxing
    Luo, Shanming
    Chang, Xuefeng
    Li, Shengbo
    Shutin, Denis
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 105 : 386 - 398