Investigation of the Thermal Characteristics of a Flat Bifacial Evaporator Loop Heat Pipe

被引：9

作者：

Chen, Yang ^{[1
]}

Feng, Daili ^{[2
]}

Miao, Jianyin ^{[1
]}

Zhang, Hongxing ^{[1
]}

Feng, Yanhui ^{[2
]}

Liu, Chenpeng ^{[2
]}

机构：

[1] China Acad Space Technol, Beijing Key Lab Space Thermal Control Technol, Beijing, Peoples R China

[2] Univ Sci & Technol Beijing, Sch Energy & Environm Engn, Beijing, Peoples R China

来源：

HEAT TRANSFER ENGINEERING | 2022年 / 43卷 / 13期

基金：

北京市自然科学基金;

关键词：

Compendex;

D O I：

10.1080/01457632.2021.1943837

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The realization of a high heat flux removal with a flat loop heat pipe at ambient temperature is of great importance for achieving thermal control within spacecraft electronic equipment. In this article, a flat bifacial evaporator loop heat pipe with two flat thermo-contact surfaces has been proposed, fabricated, and investigated. The shell of the flat evaporator was made of stainless steel, and ammonia was selected as the working fluid. The startup and operating characteristics of the single side, both sides, and switching working modes were analyzed, as well as the influence of heat consumption, orientation, wind speed, and environmental temperature. The experimental studies indicated that this novel loop heat pipe can start up and run successfully under different working modes, and that the heat dissipation capacity of a set of loop heat pipes can reach 250 W at room temperature. Based on this, a light-weight and small electronic device has been developed using a multi-functional (efficient 'heat collection-heat dissipation-structural support') flat bifacial loop heat pipe to realize a kilowatt level heat dissipation capacity. This work can provide reference for the future design of high heat flux, light-weight, and small payload for use in spacecraft.

引用

页码：1097 / 1107

页数：11

共 22 条

[1]

Cai, 2009, THESIS NANJING U AER

[2] The Influence of Horizontal Longitudinal Vibrations and the Condensation Section Temperature on the Heat Transfer Performance of a Heat Pipe [J].

Chen, Rong-Horng ;

Lin, Yung-Jen ;

Lai, Chi-Ming .

HEAT TRANSFER ENGINEERING, 2013, 34 (01) :45-53

[3] Thermal performance modeling of loop heat pipes with flat evaporator for electronics cooling [J].

Gabsi, I. ;

Maalej, S. ;

Zaghdoudi, M. C. .

MICROELECTRONICS RELIABILITY, 2018, 84 :37-47

[4]

Gai, 2009, THESIS HUAZHONG U SC

[5]

[何松 He Song], 2016, [化工学报, CIESC Journal], V67, P1778

[6] Transient responses of the flat evaporator loop heat pipe [J].

Joung, Wukchul ;

Gam, Keesool ;

Park, Kwangmin ;

Ma, Sungpil ;

Lee, Jinho .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 57 (01) :131-141

[7] Experimental study on the operating characteristics of a flat bifacial evaporator loop heat pipe [J].

Joung, Wukchul ;

Yu, Taeu ;

Lee, Jinho .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (1-3) :276-285

[8] Investigation of thermal characteristics of a loop heat pipe in a wide range of external conditions [J].

Maydanik, Y. F. ;

Vershinin, S. V. ;

Chernysheva, M. A. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 147

[9] Loop heat pipes [J].

Maydanik, YF .

APPLIED THERMAL ENGINEERING, 2005, 25 (5-6) :635-657

[10] Investigation of a compact copper-water loop heap pipe with a flat evaporator [J].

Maydanik, Yu. ;

Vershinin, S. ;

Chernysheva, M. ;

Yushakova, S. .

APPLIED THERMAL ENGINEERING, 2011, 31 (16) :3533-3541

← 1 2 3 →