Misfire detection of diesel engine based on convolutional neural networks

被引:25
作者
Zhang, Pan [1 ]
Gao, Wenzhi [1 ]
Li, Yong [1 ]
Wang, Yanjun [1 ]
机构
[1] Tianjin Univ, State Key Lab Engines, 92 Weijin Rd, Tianjin 300072, Peoples R China
关键词
Misfire fault diagnosis; internal combustion engine; feature learning; convolutional neural networks; pattern recognition; COMBUSTION TORQUE ESTIMATION; CYLINDER PRESSURE; VIBRATION SIGNAL; FAULT-DIAGNOSIS; SPEED; PERFORMANCE; METHODOLOGY;
D O I
10.1177/0954407020987077
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
With the ever-stringent vehicles exhaust emission standard and higher requirements on on-board diagnostic technology, the importance of misfire detection in vehicle emission control is emerging. The performance of a traditional misfire detection algorithm predominantly depends on the features and classifier selected. Fixed and handcrafted features require either a reliable dynamic model of an engine or a large number of experiment data to define the threshold, and then, form a map. Since convolutional neural networks (CNNs) have an inherent adaptive design and integrate the feature extraction with classification functions into a compact learning framework, the misfire fault-sensitive features can be auto-discovered from raw speed signals. Furthermore, CNNs can detect the fault features of the misfire through network training with fewer engine operating conditions. In this paper, the theory and method of the misfire diagnosis based on CNNs are presented. The experimental data for network training and testing are sampled on a six-cylinder inline diesel engine. The misfire patterns containing every one-cylinder and two-cylinder misfire are tested under the wide speed and load conditions of the engine. The results show that when the engine operates under steady-state conditions, one-cylinder or two-cylinder complete misfires can be detected accurately by CNNs. In addition, one-cylinder partial misfire is employed to examine the adaptability of trained 1-D CNN. It turns out that when the partial misfire reaches the same level as half amount of the normal fuel injection quantity, one-cylinder partial misfire can be detected with accuracy more than 96%. At last, the misfire detection under the non-stationary conditions, such as acceleration or deceleration, is conducted. The results show the 1-D CNN performed well in a limited acceleration range, and network failure occurs when the absolute acceleration of the engine speed is more than 100 r/min/s.
引用
收藏
页码:2148 / 2165
页数:18
相关论文
共 72 条
[1]   Real-time vibration-based structural damage detection using one-dimensional convolutional neural networks [J].
Abdeljaber, Osama ;
Avci, Onur ;
Kiranyaz, Serkan ;
Gabbouj, Moncef ;
Inman, Daniel J. .
JOURNAL OF SOUND AND VIBRATION, 2017, 388 :154-170
[2]  
Amadou Y., 2013, SAE TECHNICAL PAPER
[3]  
Azzoni PM., 1996, SAE TECHNICAL PAPER
[4]   Understanding and detecting misfire in an HCCI engine fuelled with ethanol [J].
Bahri, Bahram ;
Aziz, Azhar Abdul ;
Shahbakhti, Mahdi ;
Said, Mohd Farid Muhamad .
APPLIED ENERGY, 2013, 108 :24-33
[5]   Misfire detection of locomotive diesel engine by non-linear analysis [J].
Bogus, P ;
Merkisz, J .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2005, 19 (04) :881-899
[6]   Misfire Detection of Spark Ignition Engines Using a New Technique Based on Mean Output Power [J].
Boudaghi, M. ;
Shahbakhti, M. ;
Jazayeri, S. A. .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (09)
[7]  
Castro-Linares R., 2009 IEEE INT C MECH, P1
[8]   A methodology for increasing the signal to noise ratio for the misfire detection at high speed in a high performance engine [J].
Cavina, N ;
Cipolla, G ;
Marcigliano, F ;
Moro, D ;
Poggio, L .
CONTROL ENGINEERING PRACTICE, 2006, 14 (03) :243-250
[9]   Engine torque nonuniformity evaluation using instantaneous crankshaft speed signal [J].
Cavina, N ;
Ponti, F .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2003, 125 (04) :1050-1058
[10]   Misfire and Partial Burn Detection based on Ion Current Measurement [J].
Cavina, Nicolo ;
Poggio, Luca ;
Sartoni, Giovanni .
SAE INTERNATIONAL JOURNAL OF ENGINES, 2011, 4 (02) :2451-2460