Preparation and cycle performance at high temperature for Li[Ni0.5Co0.2Mn0.3]O2 coated with LiFePO4

被引：36

作者：

Kim, S. -B. ^{[2
]}

Lee, K. J. ^{[2
]}

Choi, W. J. ^{[2
]}

Kim, W. -S. ^{[2
]}

Jang, I. C. ^{[1
]}

Lim, H. H. ^{[1
]}

Lee, Y. S. ^{[1
]}

机构：

[1] Chonnam Natl Univ, Fac Appl Chem Engn, Kwangju 500757, South Korea

[2] Daejung EM Co LTD, Inchon 405820, South Korea

来源：

JOURNAL OF SOLID STATE ELECTROCHEMISTRY | 2010年 / 14卷 / 06期

关键词：

Li[Ni-0.Co-5(0).Mn-2(0).(3)]O-2 center dot Li[Ni-0.Co-5(0).Mn-2(0).(3)]O-2 coated with LiFePO4; High temperature performance; Cathode material; Lithium secondary battery; CATHODE MATERIALS; ELECTROCHEMICAL PERFORMANCE;

D O I：

10.1007/s10008-009-0873-7

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Li[Ni0.5Co0.2Mn0.3]O-2 coated with LiFePO4 was synthesized by a co-precipitation method. It consisted of the parent Li[Ni0.5Co0.2Mn0.3]O-2 as the core and the LiFePO4 as the coating material, with an average particle diameter of 500 nm. The LiFePO4-coated Li[Ni0.5Co0.2Mn0.3]O-2 showed no large initial capacity drop in the first cycle, which generally occurred with cathode materials bearing inactive coating layers such as Al2O3, ZnO, and MgO. Furthermore, it presented a remarkably improved cycle retention rate of over 89% until 400 cycles at 50 A degrees C. We suggest that the LiFePO4 coating technique is a very effective tool to improve the cycle performance of Li[Ni0.5Co0.2Mn0.3]O-2 at high temperatures.

引用

页码：919 / 922

页数：4

共 12 条

[1] Synthesis and improved electrochemical performance of Al (OH)3-coated Li[Ni1/3Mn1/3Co1/3]O2 cathode materials at elevated temperature
Jang, SB
Kang, SH
Amine, K
Bae, YC
Sun, YK
[J]. ELECTROCHIMICA ACTA, 2005, 50 (20) : 4168 - 4173
[2] Surface/Chemically modified LiMn2O4 cathodes for lithium-ion batteries
Kannan, AM
Manthiram, A
[J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 2002, 5 (07) : A167 - A169
[3] KIM WS, 2008, 2008277 IMLB
[4] Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries
Kim, Youngsik
Kim, Hyun Soo
Martin, Steve W.
[J]. ELECTROCHIMICA ACTA, 2006, 52 (03) : 1316 - 1322
[5] Effects of metal oxide coatings on the thermal stability and electrical performance of LiCoCO2 in a Li-ion cell
Kweon, HJ
Park, J
Seo, J
Kim, G
Jung, B
Lim, HS
[J]. JOURNAL OF POWER SOURCES, 2004, 126 (1-2) : 156 - 162
[6] Synthetic optimization of Li[Ni1/3Co1/3Mn1/3]O2 via co-precipitation
Lee, MH
Kang, Y
Myung, ST
Sun, YK
[J]. ELECTROCHIMICA ACTA, 2004, 50 (04) : 939 - 948
[7] The studies on structural and thermal properties of delithiated LixNi1/3Co1/3Mn1/3O2 (0<x≤1) as a cathode material in lithium ion batteries
Li, J.
Zhang, Z. R.
Guo, X. J.
Yang, Y.
[J]. SOLID STATE IONICS, 2006, 177 (17-18) : 1509 - 1516
[8] Synthesis and characterization of LiNi1-x-yCoxMnyO2 as the cathode materials of secondary lithium batteries
Liu, ZL
Yu, AS
Lee, JY
[J]. JOURNAL OF POWER SOURCES, 1999, 81 : 416 - 419
[9] The effect of ZnO coating on electrochemical cycling behavior of spinel LiMn2O4 cathode materials at elevated temperature
Sun, YK
Hong, KJ
Prakash, J
[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (07) : A970 - A972
[10] Synthesis and electrochemical properties of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode material for lithium secondary batteries
Sun, YK
Lee, YS
Yoshio, M
Amine, K
[J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 2002, 5 (05) : A99 - A102

← 1 2 →