THE WEAR TESTS OF CUTTING INSERTS WITH DIFFERENT COATINGS DURING A MILLING PROCESS

被引：0
|
作者：
Maj, Piotr [1 ]
Miko, Edward [1 ]
机构：
[1] Kielce Univ Technol, Kielce, Poland
来源：
METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2017年
关键词：
Wear of cutting inserts; milling; roughness; coatings;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The article presents the impact of cutting inserts with coatings on the roughness of the milled surface. Two types of coated steel inserts were selected for the research purpose. The first one was covered with Ti (C, N) + Al2O3 coating, while the other was TiC / TiN-CVD and Ti (C, N) + Al2O3. They were then mounted in a milling head. The process of surface milling has been subjected to C45 steel. Milling process for each inserts proceeded at the same rate of cutting. After a certain number of tool passages, the measurements of wear parameters and the roughness of the milled surface were measured. This allowed us to determine the effect of tool wear on the properties of the milling face layer.
引用
收藏
页码：1367 / 1371
页数：5
相关论文
共 50 条
  • [41] Wear mechanism model for grinding of PcBN cutting inserts
    Denkena, B.
    Grove, T.
    Behrens, L.
    Mueller-Cramm, D.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 277
  • [42] Modeling and simulation of tool wear during the cutting process
    Salvatore, F.
    Saad, S.
    Hamdi, H.
    14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), 2013, 8 : 305 - 310
  • [43] Influence of MoC Coatings on Wear of Edges of Steel Knives and Cutting Parameters for Milling Oak Wood
    V. V. Chayeuski
    A. K. Kuleshov
    Š. Barcík
    P. Koleda
    O. G. Rudak
    P. V. Rudak
    Journal of Friction and Wear, 2022, 43 : 370 - 376
  • [44] Modeling Static Cutting Forces And Stresses in the Face Milling Inserts
    Kyung, Richard
    Yim, Jesang
    2020 IEEE INTERNATIONAL IOT, ELECTRONICS AND MECHATRONICS CONFERENCE (IEMTRONICS 2020), 2020, : 557 - 560
  • [45] Influence of MoC Coatings on Wear of Edges of Steel Knives and Cutting Parameters for Milling Oak Wood
    Chayeuski, V. V.
    Kuleshov, A. K.
    Barcik, S.
    Koleda, P.
    Rudak, O. G.
    Rudak, P. V.
    JOURNAL OF FRICTION AND WEAR, 2022, 43 (06) : 370 - 376
  • [46] Estimation of the tool crater wear of the cutting tool with carbide cutting inserts in turning
    Simsive, J. V.
    Kutyshkin, A. V.
    Simsive, D. C.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2012, (01): : 50 - 55
  • [47] The investigation of the chip behaviour during the end milling cutting process
    Veres, Ovidiu Virgil
    Popa, Marcel Sabin
    Sattel, Stefan
    Jugrestan, Claudiu Ioan
    Cotarga, Elena Adina
    21ST INNOVATIVE MANUFACTURING ENGINEERING & ENERGY INTERNATIONAL CONFERENCE - IMANE&E 2017, 2017, 112
  • [48] Investigation of cutting tool endurance during wood milling process
    Keturakis, G.
    Sakalinskas, S.
    MECHANIKA 2008, PROCEEDINGS, 2008, : 249 - 254
  • [49] Cutting performance and wear mechanism of Sialon ceramic cutting inserts with TiCN coating
    Liu, Jia
    Ma, Cuiying
    Tu, Guizhao
    Long, Ying
    SURFACE & COATINGS TECHNOLOGY, 2016, 307 : 146 - 150
  • [50] The Wear of the Carbide Cutting Tools Coated with TIN during the Milling of Inconel 738
    Sebhi, A.
    Douib, N.
    PROCEEDINGS OF THE 6TH INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION (APMAS 2016), 2017, 1809
12345