Ammonium tungstate modified Li-rich Li1+xNi0.35Co0.35Mn0.30O2 to improve rate capability and productivity of lithium-ion batteries

被引：19

作者：

Aida, Taira ^{[1
]}

Tsutsui, Yusuke ^{[1
]}

Kanada, Satoshi ^{[1
]}

Okada, Jiro ^{[1
]}

Hayashi, Kazuhide ^{[2
]}

Komukai, Tetsufumi ^{[1
]}

机构：

[1] Sumitomo Met Min Co Ltd, Battery Res Labs, 17-3 Isoura Cho, Niihama, Ehime 7920002, Japan

[2] Sumitomo Met Min Co Ltd, Ichikawa Res Ctr, 18-5 Nakakokubun 3 Chome, Ichikawa, Chiba 2728588, Japan

来源：

JOURNAL OF SOLID STATE ELECTROCHEMISTRY | 2017年 / 21卷 / 07期

关键词：

Lithium nickel manganese cobalt oxide; Rate capability; Residual lithium compound; Ammonium tungstate; Lithium tungsten oxide; ELECTROCHEMICAL PROPERTIES; LICOO2;

D O I：

10.1007/s10008-017-3586-3

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

LiNi1-x-yCoxMnyO2 (NCM) with excessive lithium is known to exhibit high rate capability and charge-discharge cycling durability. However, the practical usage of NCM is difficult, because the positive electrode slurry is unstable and battery cells swell due to the alkaline residual lithium compound generated on the surface of NCM particles. To reduce the residual lithium compound, ammonium metatungstate (AMT) added to NCM is studied, and the effect is investigated by scanning electron microscopy, aberration-corrected scanning transmission electron microscopy, X-ray diffractometry, synchrotron X-ray diffractometry, and several electrochemical measurements. It is found that the AMT modification reduces the amount of alkaline residual lithium compound and improves the rate capability due to the similar to 1-nm-thick W-rich layer generated on the NCM surface.

引用

页码：2047 / 2054

页数：8

共 27 条

[1] Factors responsible for impedance rise in high power lithium ion batteries
Amine, K
Chen, CH
Liu, J
Hammond, M
Jansen, A
Dees, D
Bloom, I
Vissers, D
Henriksen, G
[J]. JOURNAL OF POWER SOURCES, 2001, 97-8 : 684 - 687
[2] Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2
Cho, Dae-Hyun
Jo, Chang-Heum
Cho, Woosuk
Kim, Young-Jun
Yashiro, Hitoshi
Sun, Yang-Kook
Myung, Seung-Taek
[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (06) : A920 - A926
[3] STRUCTURE AND ELECTROCHEMISTRY OF LI1+/-YNIO2 AND A NEW LI2NIO2 PHASE WITH THE NI(OH)2 STRUCTURE
DAHN, JR
VONSACKEN, U
MICHAL, CA
[J]. SOLID STATE IONICS, 1990, 44 (1-2) : 87 - 97
[4] Effect of rare earth elements doping on structure and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 for lithium-ion battery
Ding, Yanhuai
Zhang, Ping
Jiang, Yong
Gao, Deshu
[J]. SOLID STATE IONICS, 2007, 178 (13-14) : 967 - 971
[5] Effect of lithium-ion diffusibility on interfacial resistance of LiCoO2 thin film electrode modified with lithium tungsten oxides
Hayashi, Tetsutaro
Miyazaki, Takamichi
Matsuda, Yasutaka
Kuwata, Naoaki
Saruwatari, Motoaki
Furuichi, Yuki
Kurihara, Koji
Kuzuo, Ryuichi
Kawamura, Junichi
[J]. JOURNAL OF POWER SOURCES, 2016, 305 : 46 - 53
[6] Electrochemical effect of lithium tungsten oxide modification on LiCoO2 thin film electrode
Hayashi, Tetsutaro
Okada, Jiro
Toda, Eiji
Kuzuo, Ryuichi
Matsuda, Yasutaka
Kuwata, Naoaki
Kawamura, Junichi
[J]. JOURNAL OF POWER SOURCES, 2015, 285 : 559 - 567
[7] An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer
Jo, Chang-Heum
Cho, Dae-Hyun
Noh, Hyung-Joo
Yashiro, Hithshi
Sun, Yang-Kook
Myung, Seung Taek
[J]. NANO RESEARCH, 2015, 8 (05) : 1464 - 1479
[8] Synthesis of spherical Li[Ni(1/3-z)CO(1/3-z)Mn(1/3-z)Mgz]O2 as positive electrode material for lithium-ion battery
Kim, GH
Myung, ST
Kim, HS
Sun, YK
[J]. ELECTROCHIMICA ACTA, 2006, 51 (12) : 2447 - 2453
[9] Kokado R., 2013, Japan Patent, Patent No. [P2013-125732, 2013125732]
[10] Kokado R., 2015, Patent No. [Pat. No. US 2015/0021518 A1, 20150021518]

← 1 2 3 →